{"title":"Audi S2 Avant B4","description":null,"products":[{"product_id":"audi-sport-quattro-replica-wishbone-front-axis","title":"Audi Sport Quattro replica wishbone front axis","description":"Audi Sport Quattro S1 replica wishbones for front and rear axle. With high attention to detail, this is the \u003cstrong\u003ebest replica wishbones available\u003c\/strong\u003e.\u003cbr\u003e\n\u003cbr\u003e\nFor quattro cars that need unchanged geometry in every road, gravel and track conditions as stock wishbones pressed and steel tend to bend if used in harsh conditions. Wishbones enable wide camber wheel adjustment for track use. It gives up to 25 mm more camber adjustment.\u003cbr\u003e\n\u003cbr\u003e\nAdditionally Audi Sport replica wishbone moves the wheel to the front of the car giving more caster for better car handling. Aluminum pin is a perfect replica that contains all the elements of the original. They are suitable for rally stages and track use when standard wishbone gives up.\u003cbr\u003e\n\u003cbr\u003e\nThey provide greater strength that is required to withstand the much greater stresses and substantial geometry changes also become essential for effective use in your quattro. Tested on our race and rally cars.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\n- two wishbones for front axle (please state uprights type B2 or divided B3\/B4 - see picture)\u003cbr\u003e\n- two aluminum ball joint carriers milled on CNC machine and anodized in \u003cstrong\u003eblack\u003c\/strong\u003e\u003cbr\u003e\n- two regreasable sport Fluro bearings (22 mm hole)\u003cbr\u003e\n- two steel pins to connect with OEM struts (front - please state 17mm, 18mm or 19 mm pin)\u003cbr\u003e\n- four steel galvanized locking plates for securing aluminum ball joint carriers\u003cbr\u003e\n- all necessary screws for mounting ball joint carriers and steel pins\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n- Can be used in conjunction with the standard front sub-frame\u003cbr\u003e\n- Made to work with OEM uprights\u003cbr\u003e\n- Allows for massive camber adjustment (up to 25mm more versus OEM) and wider track\u003cbr\u003e\n- Gives additional caster. Audi B2 OEM caster is 1,25 and with our wishbone it is 2.65\u003cbr\u003e\n- Works fine with Audi Sport blade type anti roll bars\u003cbr\u003e\n- Works with Audi Sport uprights (22 mm bolt)\u003cbr\u003e\n- Prepared to work with additional trailing arm (front)\u003cbr\u003e\n- Possible to use with \"turn stop\" on Audi Sport uprights\u003cbr\u003e\n- On the contact area between aluminum ball joint carrier and inside of the wishbone the area is knurled for better grip of the carrier\u003cbr\u003e\n- To be used with 37mm diameter bushes for mounting the wishbone to the subframe\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/strong\u003e\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi B2 Coupe, Sedan\u003cbr\u003e\n- Audi B3\/B4, Coupe, Sedan, Avant\u003cbr\u003e\n\u003cbr\u003e\nBending machine ­used and milling machine for pipe treatment. Pipes are milled, metal plate is stamped, ends of the pipe are pressed and flattened for fastening of bushes, plug and bends are cut out on the laser, bushes are turned and grinded, rocker arm is welded in welding tool, dimensional tolerances: ­ 0,03 mm, concentricity tolerance 0,01 mm, tolerances are checked on separate measurement device.\u003cbr\u003e\n\u003cbr\u003e\nKnurling is made on the press by inserting the mass of material - 80 metric tons. MIG ­welding is used to connect all the pipes together to replicate Audi Sport manufacturing process. The wishbone is made of reinforced steel and powder painted in black color.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: Front wishbones increase significantly caster angle. Important note -\u0026gt; ball joint housing used in this kit has brake disc clearance is reduced in relation to OEM discs. It is not possible to use this housing with brakes discs that reduce ET compared to OEM disc brakes for example Porsche 996 calipers with 330 rotors. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826673307997,"sku":"WAS-001","price":995.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/DSC_4663.jpg?v=1765197575"},{"product_id":"audi-b2b3b4-top-mount-pair","title":"Audi B2\/B3\/B4 top mount (pair)","description":"Two piece top mount direct replacement for OEM Audi rubber part. Includes Fluro precision 35mm race bearing secured with an steel locking ring. Bearing is maintenance free. Top mounts parts are produced with C.N.C. machinery.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- set of \u003cstrong\u003etwo\u003c\/strong\u003e aluminum top mounts for one axle\u003cbr\u003e\n- Fluro bearings \u0026amp; steel locking ring\u003cbr\u003e\n- six M6 alen head screws grade 8.8 for tightening upper and lower top mount section\u003cbr\u003e\n- sleeve nuts \u0026amp; step down spacer\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- \u003cstrong\u003ePrice for a pair\u003cbr\u003e\n- \u003cstrong\u003eWorks fine with stock suspension\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\n- Spherical bearing top mounts with zero play\u003cbr\u003e\n- Proven in race and rally cars\u003cbr\u003e\n- Tightened with six M6 screws\u003cbr\u003e\n- CNC milled from solid 7075 aluminum\u003cbr\u003e\n- Fits 14mm shock absorber end with M14x1.5 thread (fits original Audi shock absorber and many aftermarket solutions - Monroe, KW, Koni, Boge, Bilstein ect.)\u003cbr\u003e\n- Hard anodized to 35 microns in black color\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\nAudi B2 Coupe Quattro - front and rear (inc. UrQuattro)\u003cbr\u003e\nAudi B2 Coupe FWD - front\u003cbr\u003e\nAudi B2 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B2 Sedan FWD - front\u003cbr\u003e\nAudi B3 Coupe Quattro - front and rear\u003cbr\u003e\nAudi B3 Coupe FWD - front\u003cbr\u003e\nAudi B3 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B3 Sedan FWD - front\u003cbr\u003e\nAudi B4 Coupe Quattro - front and rear (inc. S2)\u003cbr\u003e\nAudi B4 Coupe FWD - front\u003cbr\u003e\nAudi B4 Sedan FWD \u0026amp; Quattro - front (inc. S2)\u003cbr\u003e\nAudi B4 Avant FWD \u0026amp; Quattro - front (inc. S2, RS2)\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: The top six M6 screws should be tightened using Locktite 243 at 10 Nm. The main screw should be tightened using Locktite 243 at 90 Nm. Please tighten the bolts when the car is standing on its wheels to precise apply the torque to the bolt. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826673766749,"sku":"TMA-002","price":170.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/TMA-002_1-audi-b2-b3-b4-top-mount.jpg?v=1765197576"},{"product_id":"audi-b2b3b4-top-mount-with-12mm-offset-pair","title":"Audi B2\/B3\/B4 top mount with 12mm offset (pair)","description":"Two piece top mount with 12 mm offset made from PA9 Aluminum produced on C.N.C. machinery. It is the biggest offset available on the market !\u003cbr\u003e\n\u003cbr\u003e\nCan be used to set maximum camber\/caster without cutting the cars body. Includes Fluro (German) precision 35mm race bearing secured with an steel locking ring. Bearing is maintenance free.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\n- set of \u003cstrong\u003etwo\u003c\/strong\u003e aluminum top mounts for one axle\u003cbr\u003e\n- Fluro bearings \u0026amp; steel locking ring\u003cbr\u003e\n- six M6 alen head screws grade 8.8 for tightening upper and lower top mount section\u003cbr\u003e\n- sleeve nuts \u0026amp; step down spacer\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n- \u003cstrong\u003ePrice for a pair\u003c\/strong\u003e\u003cbr\u003e\n- \u003cstrong\u003eWorks fine with stock suspension\u003c\/strong\u003e\u003cbr\u003e\n- Fits 14mm shock absorber end with M14x1.5 thread (fits original Audi shock absorber and many aftermarket solutions - Monroe, KW, Koni, Boge, Bilstein ect.)\u003cbr\u003e\n- Spherical bearing top mounts with zero play\u003cbr\u003e\n- Proven in race and rally cars\u003cbr\u003e\n- Tightened with six M6 screws\u003cbr\u003e\n- CNC milled from solid 7075 aluminum\u003cbr\u003e\n- Caster\/camber 12mm offset adjustment\u003cbr\u003e\n- Max 11 degree tilt in front direction allowed to use offset subframe bushing for extra camber\u003cbr\u003e\n- Camber change from original 1.25 degree (Audi Ur-Quattro) up to 4.3 degree together with offset subframe bushing or 4.6 degree with our Audi Sport front wisbones replicas\u003cbr\u003e\n- Hard anodized to 35 microns in black color\u003cbr\u003e\n- Weight 1 kg (pair)\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\nAudi B2 Coupe Quattro - front and rear (inc. UrQuattro)\u003cbr\u003e\nAudi B2 Coupe FWD - front\u003cbr\u003e\nAudi B2 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B2 Sedan FWD - front\u003cbr\u003e\nAudi B3 Coupe Quattro - front and rear\u003cbr\u003e\nAudi B3 Coupe FWD - front\u003cbr\u003e\nAudi B3 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B3 Sedan FWD - front\u003cbr\u003e\nAudi B4 Coupe Quattro - front and rear (inc. S2)\u003cbr\u003e\nAudi B4 Coupe FWD - front\u003cbr\u003e\nAudi B4 Sedan FWD \u0026amp; Quattro - front (inc. S2)\u003cbr\u003e\nAudi B4 Avant FWD \u0026amp; Quattro - front (inc. S2, RS2)\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: The top six M6 screws should be tightened using Locktite 243 at 10 Nm. The main screw should be tightened using Locktite 243 at 90 Nm. Please tighten the bolts when the car is standing on its wheels to precise apply the torque to the bolt. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826673799517,"sku":"TMA-001","price":235.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/audi-b2-b3-b4-top-mount-with-12mm-offset-s2-rs2-urquattro-coupe-quattro-tma-001-2.jpg?v=1765197579"},{"product_id":"subframe-bushings-late-b4-front","title":"Subframe bushings late B4 front","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nThe bushings enable 10 mm subframe movement that will enable more caster and wider wheel spacing in the car for improved stability.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pices of aluminium bushings (12 mm bolt hole) that work with one of the cars axles\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut 7075 aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826674946397,"sku":"SBK-003","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/sbk-003-12-aluminium-subframe-bushings-b2-b3-b4-audi-80-s2-coupe.jpg?v=1765197586"},{"product_id":"polyurethane-bushes-37mm-audi-b2b3b4-track-hardness","title":"Polyurethane bushes 37mm - Audi B2\/B3\/B4 - track hardness","description":"Set for one axle (both left and right hand sides included) of polyurethane bushings. For front and rear you need to sets.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. This is a set for one axle. Recommended to use with our AudiSport replica wishbones. OEM part nr 8A0407181\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThis is a set one axle of polyurethane bushings. For front and rear you need to order two sets.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- four black Polyurethane bushings\u003cbr\u003e\n- four centering sleeves for the Polyurethane bushings\u003cbr\u003e\n- four metal washers\u003cbr\u003e\n- four teflon washers\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 37 mm\u003cbr\u003e\n- track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n-  37mm Pressed Front Arms - Audi B2\/B3\/B4 (not for cast iron arms)\u003cbr\u003e\n-  37mm Pressed Rear Arms - Audi B2 Sedan\/Coupe\u003cbr\u003e\n-  37mm Pressed Rear Arms - Audi B3 Sedan\/Coupe\u003cbr\u003e\n-  37mm Pressed Rear Arms - Audi B4 Coupe\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8A0 407 181","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826675470685,"sku":"POW-001-85","price":108.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-001-85-polyurethane-bushes-audi-quattro-s2-b2-b3-b4-37-mm-1.jpg?v=1765197588"},{"product_id":"polyurethane-bushes-45-mm-for-cast-front-arms-audi-b4-track-hardness","title":"Polyurethane bushes 45 mm for cast front arms - Audi B4 - track hardness","description":"\u003cstrong\u003eSet for one axle (both left and right hand sides included) of polyurethane bushings.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. This is a set for one axle. OEM part nr a 893407181\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- four black polyurethane bushings\u003cbr\u003e\n- four centering sleeves for the Polyurethane bushings\u003cbr\u003e\n- four polyamide washers\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 45 mm\u003cbr\u003e\n- track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n-  45mm Cast Front Iron Arms - Audi B3\/B4\u003cbr\u003e\n\u003cbr\u003e\nOem part number a 893 407 181","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826675568989,"sku":"POW-002-85","price":108.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-002-85-polyurethane-bushes-45mm-audi-s2-rs2-b4-front-poli-1.jpg?v=1765197590"},{"product_id":"full-rear-polyurethane-bushings-set-audi-b4-b5-track-hardness","title":"Full rear polyurethane bushings set - Audi B4 B5 (track hardness)","description":"A set full for rear wishbones for Audi B4 cars including S2, RS2 and B5 A4 quattro cars with steel arms.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBlack set for all rear wishbones of polyurethane bushings for cars with steel upper arms.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for rear of car all wishbones.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eIncludes the missing bush that Powerflex does not carry !\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– 12 polyurethane bushings (wishbones not included)\u003cbr\u003e\n– black track hardness rated 85 ShA bushings\u003cbr\u003e\n\u003cbr\u003e\nFitment for cars:\u003cbr\u003e\n- Audi B3\/B4 Sedan with steel pressed rear upper arms\u003cbr\u003e\n- Audi B3\/B4 Avant with steel pressed rear upper arms\u003cbr\u003e\n- Audi RS2 with steel pressed rear upper arms\u003cbr\u003e\n- Audi B5 A4 Quattro with steel pressed rear upper arms","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826678124893,"sku":"POW-007-85","price":426.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-007-85-rear-polyurethane-wishbone-bushings-set-audi-b4-s2-rs2-b4-80-sedan-avant-1.jpg?v=1765197606"},{"product_id":"polyurethane-subframe-bushings-b4-m12-track-hardness","title":"Polyurethane subframe bushings B4 - M12 - track hardness","description":"Set for one subrame of Polyurethane Subframe Bushings - size M12.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThey can be used to maintain the stock suspension comfort.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 4 pices of black polyurethane bushings (12 mm bolt) that work with one of the cars axles\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n- Track Hardness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi B4 with M12 bolt","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681598301,"sku":"POW-024-85","price":102.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-024-85-polyurethane-subframe-bushings-b4-m12-audi-s2-rs2-80-90-1.jpg?v=1765197627"},{"product_id":"polyurethane-bushes-45-mm-for-cast-front-arms-audi-b4-steet-hardness","title":"Polyurethane bushes 45 mm for cast front arms - Audi B4 - steet hardness","description":"\u003cstrong\u003eSet for one axle (both left and right hand sides included) of polyurethane bushings.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. This is a set for one axle. OEM part nr a 893407181\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- four red polyurethane bushings\u003cbr\u003e\n- four centering sleeves for the Polyurethane bushings\u003cbr\u003e\n- four polyamide washers\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 45 mm\u003cbr\u003e\n- street stiffness rated 75 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n-  45mm Cast Front Iron Arms - Audi B3\/B4\u003cbr\u003e\n\u003cbr\u003e\nOem part number a 893 407 181","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826689626461,"sku":"POW-002-75","price":108.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-002-75-polyurethane-bushes-45-mm-for-cast-front-arms-audi-b4-steet-harness-80-90-s2-rs2-1.jpg?v=1765197660"},{"product_id":"front-arb-26-mm-polyurethane-bushes-audi-b4-steet-hardness","title":"Front ARB 26 mm polyurethane bushes - Audi B4 - steet hardness","description":"Set for one front anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 811411327B\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two red polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 26 mm\u003cbr\u003e\n- street stiffness rated 75 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- 26mm front ARB - Audi B2\/B3\/B4\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 811 411 327 B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826691133789,"sku":"POW-019-75","price":40.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-019-75-front-arb-26-mm-polyurethane-bushes-audi-b4-s2-red-80-90-2.jpg?v=1765197666"},{"product_id":"front-anti-roll-bar-bush-28mm-audi-rs2-street-hardness","title":"Front anti roll bar bush 28mm - Audi RS2 - street hardness","description":"Set for one front anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8A0411327\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two red polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 28 mm\u003cbr\u003e\n- street stiffness rated 75 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- 28mm front ARB - Audi B2\/B3\/B4\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8A0 411 327","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826692149597,"sku":"POW-020-75","price":40.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-020-75-front-anti-roll-bar-bush-28mm-rs2-1.jpg?v=1765197673"},{"product_id":"polyurethane-subframe-bushings-b4-m12-steet-hardness","title":"Polyurethane subframe bushings B4 - M12 - steet hardness","description":"Set for one subrame of Polyurethane Subframe Bushings - size M12.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThey can be used to maintain the stock suspension comfort.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 4 pices of polyurethane bushings (12 mm bolt) that work with one of the cars axles\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n- Rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi B4 with M12 bolt","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826693230941,"sku":"POW-024-75","price":102.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-024-75-polyurethane-subframe-bushings-audi-b4-m12-rs2-s2-80-90-quattro-1.jpg?v=1765197680"},{"product_id":"engine-mounts-for-audi-5-cylinder-street-hardness","title":"Engine mounts for Audi 5-cylinder - street hardness","description":"Engine mounts for Audi S2\/RS2 and other 5-cylinder 20V turbo engines Audi 81 85 89 B3 B4 80 90 20V Turbo Coupe quattro.\u003cbr\u003e\n\u003cbr\u003e\nUnlike in mounts manufactured by other companies our mounts have aluminium parts are insulated from each other what makes the vibrations do not go out into the chassis dampening the vibrations in all directions.\u003cbr\u003e\n\u003cbr\u003e\nWhat's included (kit for one car):\u003cbr\u003e\n- two engine mounts (left and right)\u003cbr\u003e\n- set of screws\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- 7075 aluminium anodized silver\u003cbr\u003e\n- Red 75 ShA polyurethane\u003cbr\u003e\n- set of 10.9 grade screws silver galvanized\u003cbr\u003e\n\u003cbr\u003e\nFits cars:\u003cbr\u003e\n- Audi S2\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi C4 S4\/S6 with 5 cylinder engine\u003cbr\u003e\n- Audi B4 (80,90) with 5 cylinder engine\u003cbr\u003e\n- Audi UrQuattro\u003cbr\u003e\n- Audi B2 Coupe Quattro with 5 cylinder engine\u003cbr\u003e\n- Audi B4 Cabrio with 5 cylinder engine\u003cbr\u003e\n- Audi 200 20v\u003cbr\u003e\n\u003cbr\u003e\nIt is an upgrade to OEM 8A0399151D and 431399151D","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826694443357,"sku":"ELA-001-75","price":219.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/engine-mounts-for-audi-i5-s2-rs2-s4-200-20v-3b-aby-aan-adu-ela-001-2.jpg?v=1765197688"},{"product_id":"engine-mounts-for-audi-5-cylinder-track-hardness","title":"Engine mounts for Audi 5-cylinder - track hardness","description":"Engine mounts for Audi S2\/RS2 and other 5-cylinder 20V turbo engines Audi 81 85 89 B3 B4 80 90 20V Turbo Coupe quattro.\u003cbr\u003e\n\u003cbr\u003e\nUnlike in mounts manufactured by other companies our mounts have aluminium parts are insulated from each other what makes the vibrations do not go out into the chassis dampening the vibrations in all directions.\u003cbr\u003e\n\u003cbr\u003e\nWhat's included (kit for one car):\u003cbr\u003e\n- two engine mounts (left and right)\u003cbr\u003e\n- set of 10.9 screws\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- 7075 aluminium anodized silver\u003cbr\u003e\n- Black 85 ShA polyurethane\u003cbr\u003e\n- set of 10.9 grade screws silver galvanized\u003cbr\u003e\n\u003cbr\u003e\nFits cars:\u003cbr\u003e\n- Audi S2\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi C4 S4\/S6 with 5 cylinder engine\u003cbr\u003e\n- Audi B4 (80,90) with 5 cylinder engine\u003cbr\u003e\n- Audi UrQuattro\u003cbr\u003e\n- Audi B2 Coupe Quattro with 5 cylinder engine\u003cbr\u003e\n- Audi B4 Cabrio with 5 cylinder engine\u003cbr\u003e\n- Audi 200 20v\u003cbr\u003e\n\u003cbr\u003e\nIt is an upgrade to OEM 8A0399151D and 431399151D","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826694508893,"sku":"ELA-001-85","price":219.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/gearbox-mounts-for-audi-b2-b4-i5-s2-quattro-track-ela-001-1.jpg?v=1765197689"},{"product_id":"gearbox-mounts-for-audi-b4-i5-track-hardness","title":"Gearbox mounts for Audi B4 I5 (track hardness)","description":"Gearbox mounts for Audi S2\/RS2 and other 5-cylinder 20V turbo engines Audi 81 85 89 B3 B4 80 90 20V Turbo Coupe quattro.\u003cbr\u003e\n\u003cbr\u003e\nUnlike in mounts manufactured by other companies our mounts have aluminium parts are insulated from each other what makes the vibrations do not go out into the chassis dampening the vibrations in all directions.\u003cbr\u003e\n\u003cbr\u003e\nWhat's included (kit for one car):\u003cbr\u003e\n- two gearbox mounts (left right)\u003cbr\u003e\n- set of screws\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- 7075 aluminium anodized silver\u003cbr\u003e\n- black track hardness 85 ShA polyurethane\u003cbr\u003e\n- set of 10.9 grade screws silver galvanized\u003cbr\u003e\n\u003cbr\u003e\nFits cars:\u003cbr\u003e\n- Audi S2\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi B4 (80,90) with 5 cylinder engine\u003cbr\u003e\n- 100, 100 Avant with 5 cylinder engine\u003cbr\u003e\n- 200, 200 Avant with 5 cylinder engine\u003cbr\u003e\n- Audi B4 Cabrio with 5 cylinder engine\u003cbr\u003e\n\u003cbr\u003e\nIt is an upgrade to OEM 8A0399151D and 431399151D","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826701160797,"sku":"ELA-002-85","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/gearbox-mounts-for-audi-b4-i5-track-ela-002-1.jpg?v=1765197695"},{"product_id":"rear-anti-roll-bar-bush-15mm-street-hardness","title":"Rear anti roll bar bush 15mm (street hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8D0511327D\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two red polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 15 mm\u003cbr\u003e\n- red street hardness 75 ShA rated bushings\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant with 15 mm rear ARB\u003cbr\u003e\n- Audi A4\/S4\/RS5 B5 Quattro with 15 mm rear ARB\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0 511 327 D","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826702864733,"sku":"POW-054-75","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-048-75-rear-anti-roll-bar-bush-audi-b7-s4-rs4-22mm-street-hardness-1.jpg?v=1765197702"},{"product_id":"rear-anti-roll-bar-bush-125mm-street-hardness","title":"Rear anti roll bar bush 12,5mm (street hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8D0511327C or 8A0511327B\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two red polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 12,5 mm\u003cbr\u003e\n- red street hardness 75 ShA rated bushings\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant with 12,5 mm rear Anti-roll Bar\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0 511 327C or 8A0 511 327B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826703323485,"sku":"POW-021-75","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-048-75-rear-anti-roll-bar-bush-audi-b7-s4-rs4-22mm-street-hardness-2_cc780780-6f3c-413a-b501-f55c5f1e7823.jpg?v=1765197704"},{"product_id":"rear-anti-roll-bar-bush-16mm-street-hardness","title":"Rear anti roll bar bush 16mm (street hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8A0511327E\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- red polyurethane bushings size 16 mm\u003cbr\u003e\n- street hardness rated 75 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant with 16 mm rear ARB\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi A4\/S4\/RS4 B5 Quattro with 16 mm rear ARB\u003cbr\u003e\n- Audi A6\/S6 C5 Quattro with 16 mm rear ARB\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8A0 511 327 E","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826703782237,"sku":"POW-053-75","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-048-75-rear-anti-roll-bar-bush-audi-b7-s4-rs4-22mm-street-hardness-1_1f35cb74-ca93-4090-9f53-38c0de2e0eb2.jpg?v=1765197706"},{"product_id":"rear-anti-roll-bar-bush-18mm-track-hardness","title":"Rear anti roll bar bush 18mm (track hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8A0511327E\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- yellow polyurethane bushings size 18 mm\u003cbr\u003e\n- track hardness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi A4\/S4 B6 Quattro with 18 mm rear ARB\u003cbr\u003e\n- Audi A4\/S4 B7 Quattro with 18 mm rear ARB\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8E0 511 409AF or 8E0 511 409AQ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826705256797,"sku":"POW-081-85","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-053-85-rear-arb-16-mm-polyurethane-bushes-audi-s2-b4-sedan-avant-2_7d3528ea-5645-430b-b87a-87fb54d4def6.jpg?v=1765197714"},{"product_id":"polyurethane-front-snub-engine-mount-audi-b2b3b4b5c4","title":"Polyurethane front snub engine mount - Audi B2\/B3\/B4\/B5\/C4","description":"Our polyurethane front snub engine mount is designed to reduce unwanted engine movement and is direct replacement of OEM unit.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- reduces unwanted engine movement\u003cbr\u003e\n- stabilizes motor while car is accelerating\u003cbr\u003e\n- longer life\u003cbr\u003e\n\u003cbr\u003e\nWorks with Audi models up to (including) year 2001.\u003cbr\u003e\n- Audi B2 inc. Ur-Quattro\u003cbr\u003e\n- Audi B3\u003cbr\u003e\n- Audi B4 inc. S2 and RS2\u003cbr\u003e\n- Audi B5 inc. S4 2.7T\u003cbr\u003e\n- Audi C4 inc. S4 2.2T\u003cbr\u003e\n- Audi C5 A6 2.7T\u003cbr\u003e\n\u003cbr\u003e\nDoes not fit:\u003cbr\u003e\n- Audi V8\u003cbr\u003e\n- Audi C5 RS6\u003cbr\u003e\n- cars with 4.2 engine","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826710139229,"sku":"POW-082-75","price":30.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-082-75-polyurethane-snub-mount-audi-b2-b3-b4-b5-c4-s2-s4-rs2-c4-s4-s6-urs4-urs6-1.jpg?v=1765197725"},{"product_id":"full-rear-polyurethane-bushings-set-audi-b4-cast-street","title":"Full rear polyurethane bushings set - Audi B4 - cast - street","description":"A set full for rear wishbones for Audi B4 cars including S2, RS2\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eRed set for all rear wishbones of polyurethane bushings for cars with cast upper arms.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for rear (left right side) of car all wishbones.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eIncludes the missing bush that Powerflex does not carry !\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– 12 red polyurethane bushings (wishbones not included)\u003cbr\u003e\n– stiffness rated 75 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment for cars:\u003cbr\u003e\n- Audi B3\/B4 Sedan with cast rear upper iron arms\u003cbr\u003e\n- Audi B3\/B4 Avant with cast rear upper iron arms\u003cbr\u003e\n- Audi RS2 with cast rear upper iron arms","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826710303069,"sku":"POW-008-75","price":426.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-008-75-full-rear-polyurethane-bushings-set-audi-b4-s2-rs2-sedan-avant-cast-red-street-80-90-1.jpg?v=1765197730"},{"product_id":"polyurethane-front-snub-engine-mount-black-audi-b2b3b4b5c4","title":"Polyurethane front snub engine mount black - Audi B2\/B3\/B4\/B5\/C4","description":"Our polyurethane black front snub engine mount is designed to reduce unwanted engine movement and is direct replacement of OEM unit.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- reduces unwanted engine movement\u003cbr\u003e\n- stabilizes motor while car is accelerating\u003cbr\u003e\n- longer life\u003cbr\u003e\n\u003cbr\u003e\nWhat you get:\u003cbr\u003e\n- one black polyurethane front snub engine mount\u003cbr\u003e\n\u003cbr\u003e\nWorks with Audi models up to (including) year 2001.\u003cbr\u003e\n- Audi B2 inc. Ur-Quattro\u003cbr\u003e\n- Audi B3\u003cbr\u003e\n- Audi B4 inc. S2 and RS2\u003cbr\u003e\n- Audi B5 inc. S4 2.7T\u003cbr\u003e\n- Audi C4 inc. S4 2.2T\u003cbr\u003e\n- Audi C5 A6 2.7T\u003cbr\u003e\n\u003cbr\u003e\nDoes not fit:\u003cbr\u003e\n- Audi V8\u003cbr\u003e\n- Audi C5 RS6\u003cbr\u003e\n- cars with 4.2 engine","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826711941469,"sku":"POW-082-85","price":30.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-082-85-polyurethane-front-snub-engine-mount-audi-b2-b3-b4-b5-c4-s2-rs2-s4-s6-urs4-urs6-80-90-quattro-1.jpg?v=1765197737"},{"product_id":"sway-bar-end-links-rear-audi-b5-a4-s4-rs4-amp-b4-s2-rs2","title":"Sway bar end links rear Audi B5 A4 S4 RS4 \u0026amp; B4 S2 RS2","description":"Our product was designed to improve handling of the car in corners and steering response. Original OEM mounts have rubber that flexes during the load slowing and weakening the use of rear Sway Bar (Anti-roll bar).\u003cbr\u003e\n\u003cbr\u003e\nWith our product you can use full potential of your rear Sway Bar (Anti-roll bar) and not waist any time for response when the rubber flexes. They are direct replacement for factory unitis. This is fully reversible operation. Install takes only about 15 minutes.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CNC machined from aerospace 7075 aluminium\u003cbr\u003e\n- anodized in black\u003cbr\u003e\n- uses high quality sport end uniball\u003cbr\u003e\n- steel bearing spacers in black\u003cbr\u003e\n- compatible with all stock and aftermarket rear sway bars\u003cbr\u003e\n\u003cbr\u003e\nWhats included:\u003cbr\u003e\n- two (pair) rear links for one car\u003cbr\u003e\n- set of mounting bolts\u003cbr\u003e\n- two rubber dust boots\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi B4 S2 Sedan \/ Avant \/ Quattro\u003cbr\u003e\n- Audi S2 Coupe - it also works here\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi B5 A4 S4 RS4 \/ Quattro\u003cbr\u003e\n\u003cbr\u003e\nReplaces:\u003cbr\u003e\n- 8A0505465D \/ 8A0 505 465D\u003cbr\u003e\n- 8A0505466D \/ 8A0 505 466D\u003cbr\u003e\n- 8D0505465 \/ 8D0 505 465\u003cbr\u003e\n- 8D0505466 \/ 8D0 505 466","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826712695133,"sku":"ELA-012","price":229.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/anti-roll-bar-sway-bar-end-links-front-audi-b5-a4-s4-rs4-s2-rs2-b4-coupe-quattro-sedan-avant-ela-012-5.jpg?v=1765197740"},{"product_id":"audi-b5-a4-s4-rs4-b4-avant-sedan-s2-rs2-rear-lightweight-tubular-subframe","title":"Audi B5 A4 S4 RS4 \/ B4 avant sedan S2 RS2 \/ rear lightweight tubular subframe","description":"After long CAD development based on 3D scan of OEM subframe, tested with CAD FEA (Finite element method) and road going tests you can now buy brand new, rust free, subframe for rear of your Audi B5 inc. A4 S4 RS4 and B4 80 \/ 90 Sedan\/Avant inc. S2 and RS2.\u003cbr\u003e\n\u003cbr\u003e\nUsing same T45 tubing as in WRC cars, our subframes provide increased stiffness and mass reduction. \u003cstrong\u003eOur subframe also has reinforced rear anti-roll bar mount\u003c\/strong\u003e. All factory parts bolt up to this unit, no modifications are necessary.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- 10,5 kg, it is 6 kg (13.2 lbs) saving over OEM subframe\u003cbr\u003e\n- T45 (BS4T45 to BS4T100) tubing imported from UK and S355 metal sheets\u003cbr\u003e\n- all components TIG welded\u003cbr\u003e\n- delivered painted (powder coated) black or on special order ( 50 euro) any RAL color\u003cbr\u003e\n- solid mounts to the car body for increased stiffness and additional mass reduction\u003cbr\u003e\n- reinforced rear anti-roll bar mount. No other reinforcement necessary (weight savings)\u003cbr\u003e\n- can be used with OEM wishbones\u003cbr\u003e\n- mounts to the OEM car body and no other modifications are needed to fit the subframe\u003cbr\u003e\n- includes extra hole 25 mm higher for drag racing -\u0026gt; anti-squat system\u003cbr\u003e\n\u003cbr\u003e\nWhat is included:\u003cbr\u003e\n- rear subframe painted black\u003cbr\u003e\n- additional set of screws to use with the subframe\u003cbr\u003e\n\u003cbr\u003e\nFirst subframes will be shipped in second half of February.\u003cbr\u003e\n\u003cbr\u003e\nUsed in:\u003cbr\u003e\n- Audi A4 B5 Quattro\u003cbr\u003e\n- Audi S4 B5\u003cbr\u003e\n- Audi RS4 B5\u003cbr\u003e\n- Audi 80 Quattro Sedan\/Avant (see note below)\u003cbr\u003e\n- Audi S2 Sedan\/Avant (see note below)\u003cbr\u003e\n- Audi RS2 (see note below)\u003cbr\u003e\n\u003cbr\u003e\nFor cars with older type rear subframe used in B4 cars, to use our subframe, newer longer type (320 mm, old type has 300 mm) of track rods have to be used (8D0 501 530) in the car.\u003cbr\u003e\n\u003cbr\u003e\nT45 is a very unique seamless carbon based steel tube that has been used in many applications in different industries. It is stronger than Co-Mo 4130 tubing that also used in motorsport. It is widely used in the aerospace sector in equipment such as pilot’s seats and crew’s seats due to the materials ability to withstand high G forces without snapping or splitting. This material is a Carbon Manganese based and conforms to the full Aerospace Specification laid down by British Standards.\u003cbr\u003e\n\u003cbr\u003e\nProperties\u003cbr\u003e\nTensile: 700 – 900MPa,\u003cbr\u003e\n0.2% Yield 620MPa minimum\u003cbr\u003e\nHardness Test: 201min – 262 max HB or 210min – 275max HV.\u003cbr\u003e\n\u003cbr\u003e\nReplaces:\u003cbr\u003e\n- 8D0505235J \/ 8D0 505 235J\u003cbr\u003e\n\u003cbr\u003e\nNotice: Sold only for off road, track and racing applications. We strongly advice to mount the subframe in qualified and experienced workshop that would know what are doing.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826747396445,"sku":"WAS-501","price":1495.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-501-audi-b5-b4-a4-s4-rs4-s2-rs2-80-rear-avant-sedan-tubular-subframe-achstrager-hinten-aggregatetrager-1.jpg?v=1765197747"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/collections\/8e551476803288fd8ac175d153977bd8.jpg?v=1774678216","url":"https:\/\/verkline.com\/collections\/audi-s2-avant-b4.oembed","provider":"VERKLINE","version":"1.0","type":"link"}