{"title":"Nowości","description":null,"products":[{"product_id":"audi-sport-quattro-replica-wishbone-front-axis","title":"Audi Sport Quattro replica wishbone front axis","description":"Audi Sport Quattro S1 replica wishbones for front and rear axle. With high attention to detail, this is the \u003cstrong\u003ebest replica wishbones available\u003c\/strong\u003e.\u003cbr\u003e\n\u003cbr\u003e\nFor quattro cars that need unchanged geometry in every road, gravel and track conditions as stock wishbones pressed and steel tend to bend if used in harsh conditions. Wishbones enable wide camber wheel adjustment for track use. It gives up to 25 mm more camber adjustment.\u003cbr\u003e\n\u003cbr\u003e\nAdditionally Audi Sport replica wishbone moves the wheel to the front of the car giving more caster for better car handling. Aluminum pin is a perfect replica that contains all the elements of the original. They are suitable for rally stages and track use when standard wishbone gives up.\u003cbr\u003e\n\u003cbr\u003e\nThey provide greater strength that is required to withstand the much greater stresses and substantial geometry changes also become essential for effective use in your quattro. Tested on our race and rally cars.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\n- two wishbones for front axle (please state uprights type B2 or divided B3\/B4 - see picture)\u003cbr\u003e\n- two aluminum ball joint carriers milled on CNC machine and anodized in \u003cstrong\u003eblack\u003c\/strong\u003e\u003cbr\u003e\n- two regreasable sport Fluro bearings (22 mm hole)\u003cbr\u003e\n- two steel pins to connect with OEM struts (front - please state 17mm, 18mm or 19 mm pin)\u003cbr\u003e\n- four steel galvanized locking plates for securing aluminum ball joint carriers\u003cbr\u003e\n- all necessary screws for mounting ball joint carriers and steel pins\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n- Can be used in conjunction with the standard front sub-frame\u003cbr\u003e\n- Made to work with OEM uprights\u003cbr\u003e\n- Allows for massive camber adjustment (up to 25mm more versus OEM) and wider track\u003cbr\u003e\n- Gives additional caster. Audi B2 OEM caster is 1,25 and with our wishbone it is 2.65\u003cbr\u003e\n- Works fine with Audi Sport blade type anti roll bars\u003cbr\u003e\n- Works with Audi Sport uprights (22 mm bolt)\u003cbr\u003e\n- Prepared to work with additional trailing arm (front)\u003cbr\u003e\n- Possible to use with \"turn stop\" on Audi Sport uprights\u003cbr\u003e\n- On the contact area between aluminum ball joint carrier and inside of the wishbone the area is knurled for better grip of the carrier\u003cbr\u003e\n- To be used with 37mm diameter bushes for mounting the wishbone to the subframe\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/strong\u003e\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi B2 Coupe, Sedan\u003cbr\u003e\n- Audi B3\/B4, Coupe, Sedan, Avant\u003cbr\u003e\n\u003cbr\u003e\nBending machine ­used and milling machine for pipe treatment. Pipes are milled, metal plate is stamped, ends of the pipe are pressed and flattened for fastening of bushes, plug and bends are cut out on the laser, bushes are turned and grinded, rocker arm is welded in welding tool, dimensional tolerances: ­ 0,03 mm, concentricity tolerance 0,01 mm, tolerances are checked on separate measurement device.\u003cbr\u003e\n\u003cbr\u003e\nKnurling is made on the press by inserting the mass of material - 80 metric tons. MIG ­welding is used to connect all the pipes together to replicate Audi Sport manufacturing process. The wishbone is made of reinforced steel and powder painted in black color.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: Front wishbones increase significantly caster angle. Important note -\u0026gt; ball joint housing used in this kit has brake disc clearance is reduced in relation to OEM discs. It is not possible to use this housing with brakes discs that reduce ET compared to OEM disc brakes for example Porsche 996 calipers with 330 rotors. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826673307997,"sku":"WAS-001","price":995.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/DSC_4663.jpg?v=1765197575"},{"product_id":"audi-b2b3b4-top-mount-pair","title":"Audi B2\/B3\/B4 top mount (pair)","description":"Two piece top mount direct replacement for OEM Audi rubber part. Includes Fluro precision 35mm race bearing secured with an steel locking ring. Bearing is maintenance free. Top mounts parts are produced with C.N.C. machinery.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- set of \u003cstrong\u003etwo\u003c\/strong\u003e aluminum top mounts for one axle\u003cbr\u003e\n- Fluro bearings \u0026amp; steel locking ring\u003cbr\u003e\n- six M6 alen head screws grade 8.8 for tightening upper and lower top mount section\u003cbr\u003e\n- sleeve nuts \u0026amp; step down spacer\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- \u003cstrong\u003ePrice for a pair\u003cbr\u003e\n- \u003cstrong\u003eWorks fine with stock suspension\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\n- Spherical bearing top mounts with zero play\u003cbr\u003e\n- Proven in race and rally cars\u003cbr\u003e\n- Tightened with six M6 screws\u003cbr\u003e\n- CNC milled from solid 7075 aluminum\u003cbr\u003e\n- Fits 14mm shock absorber end with M14x1.5 thread (fits original Audi shock absorber and many aftermarket solutions - Monroe, KW, Koni, Boge, Bilstein ect.)\u003cbr\u003e\n- Hard anodized to 35 microns in black color\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\nAudi B2 Coupe Quattro - front and rear (inc. UrQuattro)\u003cbr\u003e\nAudi B2 Coupe FWD - front\u003cbr\u003e\nAudi B2 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B2 Sedan FWD - front\u003cbr\u003e\nAudi B3 Coupe Quattro - front and rear\u003cbr\u003e\nAudi B3 Coupe FWD - front\u003cbr\u003e\nAudi B3 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B3 Sedan FWD - front\u003cbr\u003e\nAudi B4 Coupe Quattro - front and rear (inc. S2)\u003cbr\u003e\nAudi B4 Coupe FWD - front\u003cbr\u003e\nAudi B4 Sedan FWD \u0026amp; Quattro - front (inc. S2)\u003cbr\u003e\nAudi B4 Avant FWD \u0026amp; Quattro - front (inc. S2, RS2)\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: The top six M6 screws should be tightened using Locktite 243 at 10 Nm. The main screw should be tightened using Locktite 243 at 90 Nm. Please tighten the bolts when the car is standing on its wheels to precise apply the torque to the bolt. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826673766749,"sku":"TMA-002","price":170.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/TMA-002_1-audi-b2-b3-b4-top-mount.jpg?v=1765197576"},{"product_id":"audi-b2b3b4-top-mount-with-12mm-offset-pair","title":"Audi B2\/B3\/B4 top mount with 12mm offset (pair)","description":"Two piece top mount with 12 mm offset made from PA9 Aluminum produced on C.N.C. machinery. It is the biggest offset available on the market !\u003cbr\u003e\n\u003cbr\u003e\nCan be used to set maximum camber\/caster without cutting the cars body. Includes Fluro (German) precision 35mm race bearing secured with an steel locking ring. Bearing is maintenance free.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\n- set of \u003cstrong\u003etwo\u003c\/strong\u003e aluminum top mounts for one axle\u003cbr\u003e\n- Fluro bearings \u0026amp; steel locking ring\u003cbr\u003e\n- six M6 alen head screws grade 8.8 for tightening upper and lower top mount section\u003cbr\u003e\n- sleeve nuts \u0026amp; step down spacer\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n- \u003cstrong\u003ePrice for a pair\u003c\/strong\u003e\u003cbr\u003e\n- \u003cstrong\u003eWorks fine with stock suspension\u003c\/strong\u003e\u003cbr\u003e\n- Fits 14mm shock absorber end with M14x1.5 thread (fits original Audi shock absorber and many aftermarket solutions - Monroe, KW, Koni, Boge, Bilstein ect.)\u003cbr\u003e\n- Spherical bearing top mounts with zero play\u003cbr\u003e\n- Proven in race and rally cars\u003cbr\u003e\n- Tightened with six M6 screws\u003cbr\u003e\n- CNC milled from solid 7075 aluminum\u003cbr\u003e\n- Caster\/camber 12mm offset adjustment\u003cbr\u003e\n- Max 11 degree tilt in front direction allowed to use offset subframe bushing for extra camber\u003cbr\u003e\n- Camber change from original 1.25 degree (Audi Ur-Quattro) up to 4.3 degree together with offset subframe bushing or 4.6 degree with our Audi Sport front wisbones replicas\u003cbr\u003e\n- Hard anodized to 35 microns in black color\u003cbr\u003e\n- Weight 1 kg (pair)\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\nAudi B2 Coupe Quattro - front and rear (inc. UrQuattro)\u003cbr\u003e\nAudi B2 Coupe FWD - front\u003cbr\u003e\nAudi B2 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B2 Sedan FWD - front\u003cbr\u003e\nAudi B3 Coupe Quattro - front and rear\u003cbr\u003e\nAudi B3 Coupe FWD - front\u003cbr\u003e\nAudi B3 Sedan Quattro - front and rear\u003cbr\u003e\nAudi B3 Sedan FWD - front\u003cbr\u003e\nAudi B4 Coupe Quattro - front and rear (inc. S2)\u003cbr\u003e\nAudi B4 Coupe FWD - front\u003cbr\u003e\nAudi B4 Sedan FWD \u0026amp; Quattro - front (inc. S2)\u003cbr\u003e\nAudi B4 Avant FWD \u0026amp; Quattro - front (inc. S2, RS2)\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: The top six M6 screws should be tightened using Locktite 243 at 10 Nm. The main screw should be tightened using Locktite 243 at 90 Nm. Please tighten the bolts when the car is standing on its wheels to precise apply the torque to the bolt. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826673799517,"sku":"TMA-001","price":235.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/audi-b2-b3-b4-top-mount-with-12mm-offset-s2-rs2-urquattro-coupe-quattro-tma-001-2.jpg?v=1765197579"},{"product_id":"audi-sport-replica-wishbone-full-set-for-b3b4-divided-type-uprights","title":"Audi Sport replica wishbone full set for B3\/B4 divided type uprights","description":"Audi Sport Quattro S1 replica wishbones \/ control arms for front and rear axle. With high attention to detail, this is the \u003cstrong\u003ebest and most precise replica wishbones available\u003c\/strong\u003e.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eMade for Audi B3\/B4 divided uprights in B2 \/ B3 or B4 Coupe Quattro cars.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFor quattro cars that need unchanged geometry in every road, gravel and track conditions as stock wishbones pressed and steel tend to bend if used in harsh conditions. Wishbones enable wide camber wheel adjustment for track use. It gives up to 25 mm more camber adjustment.\u003cbr\u003e\n\u003cbr\u003e\nAdditionally Audi Sport replica wishbones \/ control arms move the wheel to the front of the car giving more caster for better car handling. Aluminum pin is a perfect replica that contains all the elements of the original. They are suitable for rally stages and track use when standard wishbone gives up.\u003cbr\u003e\n\u003cbr\u003e\nThey provide greater strength that is required to withstand the much greater stresses and substantial geometry changes also become essential for effective use in your quattro. Tested on our race and rally cars.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\n- two wishbones [ control arms ] (E355 N \/ St 52.4 steel) for front axle\u003cbr\u003e\n- two wishbones [ control arms ] (E355 N \/ St 52.4 steel) for rear axle\u003cbr\u003e\n- four aluminum (PA9 \/ 7075) ball joint carriers milled on CNC machine and anodized in silver\u003cbr\u003e\n- four maintenance free sport Fluro bearings (22 mm hole)\u003cbr\u003e\n- four steel pins (EN C45) to connect with OEM struts (front and rear - B3\/B4 divided type uprights)\u003cbr\u003e\n- eight steel galvanized locking plates for securing aluminum ball joint carriers\u003cbr\u003e\n- all necessary screws for mounting ball joint carriers and steel pins\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003e- Can be used in conjunction with the standard front\/rear sub-frame\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003e - Made to work with OEM uprights (quattro)\u003c\/strong\u003e\u003cbr\u003e\n- Allows for massive camber adjustment (up to 25mm more versus OEM) and wider track\u003cbr\u003e\n- Gives additional caster. Audi B4 OEM caster is 2 and with our wishbone it is 2.65\u003cbr\u003e\n- Works fine with Audi Sport blade type anti roll bars\u003cbr\u003e\n- Works with Audi Sport uprights (22 mm bolt)\u003cbr\u003e\n- Prepared to work with additional trailing arm (both in front and rear)\u003cbr\u003e\n- Possible to use with \"turn stop\" on Audi Sport uprights\u003cbr\u003e\n- On the contact area between aluminum ball joint carrier and inside of the wishbone the area is knurled for better grip of the carrier\u003cbr\u003e\n- To be used with 37mm diameter bushes for mounting the wishbone to the subframe\u003cbr\u003e\n\u003cbr\u003e\nBending machine ­used and milling machine for pipe treatment. Pipes are milled, metal plate is stamped, ends of the pipe are pressed and flattened for fastening of bushes, plug and bends are cut out on the laser, bushes are turned and grinded, rocker arm is welded in welding tool, dimensional tolerances: ­ 0,03 mm, concentricity tolerance 0,01 mm, tolerances are checked on separate measurement device.\u003cbr\u003e\n\u003cbr\u003e\nKnurling is made on the press by inserting the mass of material - 80 metric tons. MIG ­welding is used to connect all the pipes together to replicate Audi Sport manufacturing process. The wishbone is made of reinforced steel (E355 N \/ St 52.4) and powder painted in black color.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\n- All Audi Coupe Quattro cars with divided uprights. See picture in the gallery.\u003cbr\u003e\n- Audi S2 Coupe\u003cbr\u003e\n- Audi 80 Coupe Quattro\u003cbr\u003e\n- Audi 90 Coupe Quattro\u003cbr\u003e\nIf you have doubts if they will fit. Write us a message and we will be glad to help you with the right setup.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: Instructions are provided to the customer on the installation of the kit. Front wishbones increase significantly caster angle.  Important note -\u0026gt; ball joint housing used in this kit has brake disc clearance is reduced in relation to OEM discs. It is not possible to use this housing with brakes discs that reduce ET compared to OEM disc brakes for example Porsche 996 calipers with 330 rotors.\u003cbr\u003e\n\u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826674389341,"sku":"WAS-003","price":1695.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/WAS-003-1-tubular-audisport-wishbone-set-quattro-s1-sport-audisport.jpg?v=1765197582"},{"product_id":"audi-sport-quatro-s1-replica-wishbones-full-set-for-b2-type-uprights","title":"Audi Sport quatro S1 replica wishbones full set for B2 type uprights","description":"Audi Sport Quattro S1 replica wishbones \/ control arms for front and rear axle. With high attention to detail, this is the \u003cstrong\u003ebest and most precise replica wishbones available\u003c\/strong\u003e.\u003cbr\u003e\n\u003cbr\u003e\nFor quattro cars that need unchanged geometry in every road, gravel and track conditions as stock wishbones pressed and steel tend to bend if used in harsh conditions. Wishbones enable wide camber wheel adjustment for track use. It gives up to 25 mm more camber adjustment.\u003cbr\u003e\n\u003cbr\u003e\nAdditionally Audi Sport replica wishbones \/ control arms move the wheel to the front of the car giving more caster for better car handling. Aluminum pin is a perfect replica that contains all the elements of the original. They are suitable for rally stages and track use when standard wishbone gives up.\u003cbr\u003e\n\u003cbr\u003e\nThey provide greater strength that is required to withstand the much greater stresses and substantial geometry changes also become essential for effective use in your quattro. Tested on our race and rally cars.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\n- two wishbones [ control arms ] (E355 N \/ St 52.4 steel) for front axle\u003cbr\u003e\n- two wishbones [ control arms ] (E355 N \/ St 52.4 steel) for rear axle\u003cbr\u003e\n- four aluminum (PA9 \/ 7075) ball joint carriers milled on CNC machine and anodized in silver\u003cbr\u003e\n- four maintenance free sport Fluro bearings (22 mm hole)\u003cbr\u003e\n- two steel pins (EU C45) to connect with OEM struts (for Audi Coupe Quattro 17 mm, for Ur-quattro 18mm)\u003cbr\u003e\n- two steel mounts (EU C45) for rear OEM struts\u003cbr\u003e\n- eight steel galvanized locking plates for securing aluminum ball joint carriers\u003cbr\u003e\n- all necessary screws for mounting ball joint carriers and steel pins\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n- Can be used in conjunction with the standard front\/rear sub-frame\u003cbr\u003e\n- Made to work with OEM uprights (Quattro B2\/B3, Ur-quattro - see drawing)\u003cbr\u003e\n- Allows for massive camber adjustment (up to 25mm more versus OEM) and wider track\u003cbr\u003e\n- Gives additional caster. Audi B2 OEM caster is 1,25 and with our wishbone it is 2.65\u003cbr\u003e\n- Works fine with Audi Sport blade type anti roll bars\u003cbr\u003e\n- Works with Audi Sport uprights (22 mm bolt)\u003cbr\u003e\n- Prepared to work with additional trailing arm (both in front and rear)\u003cbr\u003e\n- Possible to use with \"turn stop\" on Audi Sport uprights\u003cbr\u003e\n- On the contact area between aluminum ball joint carrier and inside of the wishbone the area is knurled for better grip of the carrier\u003cbr\u003e\n- To be used with 37mm diameter bushes for mounting the wishbone to the subframe\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\n- Audi Coupe Quattro\u003cbr\u003e\n- Audi Ur-quattro\u003cbr\u003e\n\u003cbr\u003e\nBending machine ­used and milling machine for pipe treatment. Pipes are milled, metal plate is stamped, ends of the pipe are pressed and flattened for fastening of bushes, plug and bends are cut out on the laser, bushes are turned and grinded, rocker arm is welded in welding tool, dimensional tolerances: ­ 0,03 mm, concentricity tolerance 0,01 mm, tolerances are checked on separate measurement device.\u003cbr\u003e\n\u003cbr\u003e\nKnurling is made on the press by inserting the mass of material - 80 metric tons. MIG ­welding is used to connect all the pipes together to replicate Audi Sport manufacturing process. The wishbone is made of reinforced steel and powder painted in black color.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: minor tools are required to install rear wishbones bolts. You need to have burner to heat the rear uprights for the bolt to be pushed inside. Instructions are provided to the customer on the installation of the kit. Front wishbones increase significantly caster angle. Important note -\u0026gt; ball joint housing used in this kit has brake disc clearance is reduced in relation to OEM discs. It is not possible to use this housing with brakes discs that reduce ET compared to OEM disc brakes for example Porsche 996 calipers with 330 rotors. \u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826674422109,"sku":"WAS-002","price":1695.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/WAS-002_1-tubular-audisport-replica-wishbone-set-a2-b2-s1-audi-quattro-sport.jpg?v=1765197583"},{"product_id":"subframe-bushings-b2b3b4","title":"Subframe bushings B2\/B3\/B4","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pices of aluminium bushings (10 mm bolt) that work with one of the cars axles (front or rear). For whole car you need to order two sets.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut 7075 aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826674913629,"sku":"SBK-001","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/sbk-001-11-aluminium-subframe-bushings-b2-b3-b4-audi-80-s2-coupe.jpg?v=1765197584"},{"product_id":"subframe-bushings-late-b4-front","title":"Subframe bushings late B4 front","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nThe bushings enable 10 mm subframe movement that will enable more caster and wider wheel spacing in the car for improved stability.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pices of aluminium bushings (12 mm bolt hole) that work with one of the cars axles\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut 7075 aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826674946397,"sku":"SBK-003","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/sbk-003-12-aluminium-subframe-bushings-b2-b3-b4-audi-80-s2-coupe.jpg?v=1765197586"},{"product_id":"subframe-bushings-b2b3b4-offset","title":"Subframe bushings B2\/B3\/B4 offset","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pices of aluminium (10 mm bolt hole) bushings that work with one of the cars axles (front or rear). For both axles you need to order two sets.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut 7075 aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826674979165,"sku":"SBK-002","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/sbk-002-11-aluminium-subframe-bushings-b2-b3-b4-audi-80-s2-coupe.jpg?v=1765197587"},{"product_id":"polyurethane-bushes-37mm-audi-b2b3b4-track-hardness","title":"Polyurethane bushes 37mm - Audi B2\/B3\/B4 - track hardness","description":"Set for one axle (both left and right hand sides included) of polyurethane bushings. For front and rear you need to sets.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. This is a set for one axle. Recommended to use with our AudiSport replica wishbones. OEM part nr 8A0407181\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThis is a set one axle of polyurethane bushings. For front and rear you need to order two sets.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- four black Polyurethane bushings\u003cbr\u003e\n- four centering sleeves for the Polyurethane bushings\u003cbr\u003e\n- four metal washers\u003cbr\u003e\n- four teflon washers\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 37 mm\u003cbr\u003e\n- track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n-  37mm Pressed Front Arms - Audi B2\/B3\/B4 (not for cast iron arms)\u003cbr\u003e\n-  37mm Pressed Rear Arms - Audi B2 Sedan\/Coupe\u003cbr\u003e\n-  37mm Pressed Rear Arms - Audi B3 Sedan\/Coupe\u003cbr\u003e\n-  37mm Pressed Rear Arms - Audi B4 Coupe\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8A0 407 181","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826675470685,"sku":"POW-001-85","price":108.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-001-85-polyurethane-bushes-audi-quattro-s2-b2-b3-b4-37-mm-1.jpg?v=1765197588"},{"product_id":"rear-subframe-bushings-audi-b4b5","title":"Rear subframe bushings Audi B4\/B5","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nThe bushings are for Audi B4 rear (Quattro) sedan\/avant versions (incl. RS2) and Audi rear B5 A4\/S4\/RS4 (Quattro).\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pieces of aluminium bushings\u003cbr\u003e\n- it is full replacement set for the car's rear axle subframe bushings\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi B4 Quattro Sedan\/Avant\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi B5 A4 Quattro\u003cbr\u003e\n- Audi B5 S4\u003cbr\u003e\n- Audi B5 RS4\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr:\u003cbr\u003e\n8A0505145\u003cbr\u003e\n8A0505145D\u003cbr\u003e\n8D0505145C\u003cbr\u003e\n8A0505145E\u003cbr\u003e\n8D0505145D","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826675503453,"sku":"SBK-005","price":195.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/aluminium-subframe-bushings-rear-b4-b5-s2-b4-rs2-quattro-a4-s4-rs4-sbk-005-1.jpg?v=1765197589"},{"product_id":"polyurethane-bushes-45-mm-for-cast-front-arms-audi-b4-track-hardness","title":"Polyurethane bushes 45 mm for cast front arms - Audi B4 - track hardness","description":"\u003cstrong\u003eSet for one axle (both left and right hand sides included) of polyurethane bushings.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. This is a set for one axle. OEM part nr a 893407181\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- four black polyurethane bushings\u003cbr\u003e\n- four centering sleeves for the Polyurethane bushings\u003cbr\u003e\n- four polyamide washers\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 45 mm\u003cbr\u003e\n- track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n-  45mm Cast Front Iron Arms - Audi B3\/B4\u003cbr\u003e\n\u003cbr\u003e\nOem part number a 893 407 181","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826675568989,"sku":"POW-002-85","price":108.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-002-85-polyurethane-bushes-45mm-audi-s2-rs2-b4-front-poli-1.jpg?v=1765197590"},{"product_id":"rear-track-rods-for-support-frame-with-arb","title":"Rear track rods for support frame with ARB","description":"Rear tie rod set for Audi Quattro (B2\/B3\/B4) made of 25 mm thick tube - same size as used in the B Group cars. Equipped with motorsport joints, spacers and locknuts. It enables very precise setting of rear geometry settings.\u003cbr\u003e\n\u003cbr\u003e\nThis track rod is for cars equipped with rear anti-roll bar in the rear subframe.\u003cbr\u003e\n\u003cbr\u003e\nIt’s a must have for track or race use, as the OEM ones give up in extreme conditions changing your geometry setup, while the car is in the corner.\u003cbr\u003e\n\u003cbr\u003e\nAll non-OEM parts necessary for the installation are supplied in the kit.\u003cbr\u003e\n\u003cbr\u003e\nTotal rod adjustment lengths (distances between the central axes of the uniballs):\u003cbr\u003e\nmin: 345 [\u003cspan class=\"il\"\u003emm\u003c\/span\u003e]\u003cbr\u003e\nmax: \u003cspan class=\"il\"\u003e377\u003c\/span\u003e[\u003cspan class=\"il\"\u003emm\u003c\/span\u003e]\u003cbr\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cdiv class=\"adm\"\u003e\n\u003cbr\u003e\n\u003cdiv id=\"q_10062\" class=\"ajR h4\"\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\nWhat's included:\u003cbr\u003e\n- One set (two pieces) of rear black tire rods for rear with inox finish\u003cbr\u003e\n- Four motorsport tie rod ends (left and right threads)\u003cbr\u003e\n- Steel machined tie rod end adapters to fit stock bearing carriers\u003cbr\u003e\n- Self-locking nuts\u003cbr\u003e\n- Four rubber sealing boots\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Works with stock or Audi Sport wishbones and OEM rear support frame with sway bar\u003cbr\u003e\n- 25 mm thick rear tire rods powder painted in black\u003cbr\u003e\n- Locknuts for securing the motorsport joints\u003cbr\u003e\n- Galvanized tire rod end adapters for fitting bearing carriers\u003cbr\u003e\n\u003cbr\u003e\nFits:\u003cbr\u003e\n- Audi B2 Coupe\/Sedan Quattro with rear ARB\u003cbr\u003e\n- Audi B3 Coupe\/Sedan Quattro with rear ARB\u003cbr\u003e\n- Audi B4 Coupe Quattro with rear ARB\u003cbr\u003e\n- Audi S2 Coupe","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826675634525,"sku":"TRS-002","price":281.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/trs-002-1-rear-track-rods-with-arb-audi-s2-b4.jpg?v=1765197592"},{"product_id":"rear-track-rods-for-support-frame-without-arb","title":"Rear track rods for support frame without ARB","description":"Rear tie rod set for Audi Quattro (B2\/B3\/B4) made of 25 mm thick tube - same size as used in the B Group cars. Equipped with motorsport joints, spacers and locknuts. It enables very precise setting of rear geometry settings.\u003cbr\u003e\n\u003cbr\u003e\nThis track rod is for cars without rear anti-roll bar (ARB) in the rear subframe.\u003cbr\u003e\n\u003cbr\u003e\nIt’s a must have for track or race use, as the OEM ones give up in extreme conditions changing your geometry setup, while the car is in the corner.\u003cbr\u003e\n\u003cbr\u003e\nAll non-OEM parts necessary for the installation are supplied in the kit.\u003cbr\u003e\n\u003cbr\u003e\nTotal rods adjustment lengths (distances between the central axes of the uniballs)::\u003cbr\u003e\nmin: 293 [mm]\u003cbr\u003e\nmax: 325 [mm]\u003cbr\u003e\n\u003cbr\u003e\nWhat's included:\u003cbr\u003e\n- One set (two pieces) of rear black tire rods for rear with inox finish\u003cbr\u003e\n- Four motorsport racing tie rod ends (left and right threads)\u003cbr\u003e\n- Steel machined tie rod end adapters to fit stock bearing carriers\u003cbr\u003e\n- Self-locking nuts\u003cbr\u003e\n- Four rubber sealing boots\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Works with stock or Audi Sport wishbones and OEM rear support frame with sway bar\u003cbr\u003e\n- 25 mm thick rear tire rods powder painted in black\u003cbr\u003e\n- Locknuts for securing the motorsport joints\u003cbr\u003e\n- Galvanized tire rod end adapters for fitting bearing carriers\u003cbr\u003e\n\u003cbr\u003e\nFits:\u003cbr\u003e\n- Audi B2 Coupe\/Sedan Quattro without rear ARB with newer type divided wheel knuckle.\u003cbr\u003e\n- Audi B3 Coupe\/Sedan Quattro without rear ARB with newer type divided wheel knuckle.\u003cbr\u003e\n- Audi B4 Coupe Quattro without rear ARB with newer type divided wheel knuckle.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826676093277,"sku":"TRS-003","price":281.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/trs-003-1-rear-track-rods-for-support-frame-no-arb-audi-s2-b4.jpg?v=1765197593"},{"product_id":"front-track-rods-for-audi-b2b3b4","title":"Front track rods for Audi B2\/B3\/B4","description":"Steering rod set for Audi (B2, B3, B4) Coupe, Quattro, 80\/90\/Coupe, S2\/RS2, etc. 25 mm think tubing like in B Group times to provide strong and precision car handing in the corners under extreme loads.\u003cbr\u003e\n\u003cbr\u003e\nRods can be adjusted to fit any suspension settings including longer Audi Sport wishbones.\u003cbr\u003e\n\u003cbr\u003e\nMotorsport tie rod ends will withhold any stress while the car is on the track or bumpy gravel road. Locknuts on every end of the stick will enable precision alignment of the suspension.\u003cbr\u003e\n\u003cbr\u003e\nAll non-OEM parts necessary for the installation are supplied in the kit.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- One set (two pieces) of front track rods with inox finish\u003cbr\u003e\n- Four motorsport tie rod ends\u003cbr\u003e\n- Steel machined tie rod end adapters to fit to stock uprights (B3\/B4 type)\u003cbr\u003e\n- Self-locking nuts\u003cbr\u003e\n- Four rubber sealing boots\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Works with stock OEM or Audi Sport wishbones\u003cbr\u003e\n- 25 mm thick steering rods powder painted in black\u003cbr\u003e\n- Locknuts for securing the motorsport joints\u003cbr\u003e\n- Galvanized tire rod end adapters for fitting bearing carriers\u003cbr\u003e\n\u003cbr\u003e\nFits (does not fit cars with 10VT engines) :\u003cbr\u003e\n- Audi 80 B2 (FWD \u0026amp; Quattro)\u003cbr\u003e\n- Audi 80\/90 B3 (FWD \u0026amp; Quattro)\u003cbr\u003e\n- Audi 80\/90 B4 (FWD \u0026amp; Quattro)\u003cbr\u003e\n- Audi S2\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi Ur-Quattro with B3\/B4 uprights\u003cbr\u003e\n- Audi Coupe Quattro\u003cbr\u003e\n- Audi Ur Quattro 20vt (please notice this in the comment when making order).\u003cbr\u003e\n\u003cbr\u003e\nIt will not fit:\u003cbr\u003e\n- Audi Ur-Quattro 10vt\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: Some clearancing of the steering rack bracket may be necessary to prevent binding or interference, depending on your suspension settings. Usually not needed unless you have large caster setup.\u003c\/em\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826676126045,"sku":"TRS-001","price":292.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/trs-001-1-front-track-rods-steering-rod-for-audi-s2-b4.jpg?v=1765197594"},{"product_id":"subframe-bushings-rear-audi-c4-s4s6urs4urs6-v8-d11-200-c3","title":"Subframe bushings rear Audi C4 (S4\/S6\/UrS4\/UrS6) \/ V8 (D11) \/ 200 C3","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nThe bushings are for Audi C4 incl. S4\/S6\/UrS4\/UrS6.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pieces of aluminium bushings\u003cbr\u003e\n- it is full replacement set for the car's rear axle subframe bushings\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n\u003cbr\u003e\nFits:\u003cbr\u003e\n- Audi C4 100 S4 \/ S6\u003cbr\u003e\n- Audi V8 D11\u003cbr\u003e\n- Audi 200 C4 3B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826676191581,"sku":"SBK-011","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/aluminium-subframe-bushings-rear-audi-c4-d11-c3-sbk-011-1.jpg?v=1765197595"},{"product_id":"front-subframe-bushings-audi-v8-d11-200-c3-type-44","title":"Front subframe bushings Audi V8 D11 \/ 200 C3 (type 44)","description":"Get rid of your old rubber bushings and insert aluminium ones that will increase stability of the car in the corner. Aluminium subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nMade for Audi V8 D11 and Audi 200 C3 (type 44) front axis.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pices of aluminium bushings that work with front car axis.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed CNC cut PA6 aluminium\u003cbr\u003e\n- Anodized in silver\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826676289885,"sku":"SBK-010","price":109.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/aluminium-subframe-bushings-aud-v8-d11-sbk-010-1.jpg?v=1765197596"},{"product_id":"front-control-arm-polyurethane-bushings-audi-100-c4-track-hardness","title":"Front control arm polyurethane bushings - Audi 100 C4 - track hardness","description":"A set for front wishbone for Audi 100 C4.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBlack set for both front wishbones (left right) of polyurethane bushings.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for front car wishbones (internal and external bushings).\u003cbr\u003e\n\u003cbr\u003e\nWhat’s Included:\u003cbr\u003e\n– four black Polyurethane bushings\u003cbr\u003e\n– grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– polyurethane bushings\u003cbr\u003e\n– track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Front wishbone arm – Audi 100 C4\u003cbr\u003e\n– Front wishbone arm – Audi S4\u003cbr\u003e\n– Front wishbone arm – Audi S6\u003cbr\u003e\n– Front wishbone arm – Audi Ur-S4\u003cbr\u003e\n– Front wishbone arm – Audi Ur-S6\u003cbr\u003e\n\u003cbr\u003e\nNecessary to use with:\u003cbr\u003e\n- 4A0 407 151 Audi\u003cbr\u003e\n- 4A0 407 152 Audi\u003cbr\u003e\n- 4A0 407 181A Audi\u003cbr\u003e\n- 4A0 407 183D Audi\u003cbr\u003e\n- JTC254 TRW\u003cbr\u003e\n- JTC255 TRW\u003cbr\u003e\n\u003cbr\u003e\nNotice: If your car is lowered from OEM ride height, the lifespan of the bushes will be shortened.\u003cbr\u003e\n\u003cbr\u003e\nNotice 2: When pressing the bushing it has to be inserted tight to control arm hole with a hydraulic press. If the bushing is pressed with hands or requires little force to press this means that the wishbone is worn out and needs to be replaced with a new one in accordance with the wishbones recommended above.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826676945245,"sku":"POW-003-85","price":148.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-003-85-front-control-arm-polyurethane-bushings-audi-100-c4-1.jpg?v=1765197598"},{"product_id":"front-anti-roll-bar-bush-28mm-audi-100-c4-track-hardness","title":"Front anti roll bar bush 28mm - Audi 100 C4 - track hardness","description":"Front polyurethane ARB brushing 28 mm for Audi S4 \/ UrS4 \/ UrS6 (C4).\u003cbr\u003e\n\u003cbr\u003e\nFeatures special undercut for the bump on the front anti-roll bar. Track hardness rated 85 ShA. Replaces 4A0 411 327J\u003cbr\u003e\n\u003cbr\u003e\nWhat's included:\u003cbr\u003e\n- two black polyurethane ARB bushings for the front of the car\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFits cars with 28 mm front anti-roll bar:\u003cbr\u003e\n- Audi S4 C4\u003cbr\u003e\n- Audi UrS4 C4\u003cbr\u003e\n- Audi S6 C4\u003cbr\u003e\n- Audi UrS6 C4\u003cbr\u003e\n\u003cbr\u003e\nReplaces OEM part: 4A0411327J","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826677010781,"sku":"POW-005-85","price":45.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-005-front-polyurethane-arb-brushing-28-mm-for-audi-c4-100-s4-urs4-s6-urs6-1.jpg?v=1765197599"},{"product_id":"rear-anti-roll-bar-bush-17mm-for-audi-c4-v8-d11-track-hardness","title":"Rear anti roll bar bush 17mm for Audi C4 \/ V8 D11 - track hardness","description":"Rear polyurethane ARB brushing 17 mm for Audi S4 \/ Ur S4 \/ UrS6 (C4) and Audi V8 (D11).\u003cbr\u003e\n\u003cbr\u003e\nFeatures special undercut for the bump on the rear anti-roll bar. Track stiffness rated 85 ShA. Replaces part 4A0 511 327\u003cbr\u003e\n\u003cbr\u003e\nWhat's included:\u003cbr\u003e\n- two black polyurethane ARB bushings for the rear of the car\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFits cars equipped with 17 mm rear anti-roll bar:\u003cbr\u003e\n- Audi S4 C4\u003cbr\u003e\n- Audi UrS4 C4\u003cbr\u003e\n- Audi S6 C4\u003cbr\u003e\n- Audi UrS6 C4\u003cbr\u003e\n- Audi V8 D11\u003cbr\u003e\n\u003cbr\u003e\nReplaces OEM part: 4A0511327","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826677076317,"sku":"POW-006-85","price":40.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-006-85-rear-polyurethane-arb-brushing-17-mm-for-audi-c4-100-s4-s6-urs4-urs6-1.jpg?v=1765197600"},{"product_id":"front-solid-subframe-bushings-for-audi-c4","title":"Front solid subframe bushings for Audi C4","description":"Front subframe solid steel and aluminium bushings for Audi S4 \/ S6 \/ UrS4 \/ UrS6 ( C4 ). It is an upgrade to OEM 4A0399415B and 4A0399419E \/ 4A0399420E\u003cbr\u003e\n\u003cbr\u003e\nWhat's included (kit for one car):\u003cbr\u003e\n- two steel mounts for the rear of the front subframe\u003cbr\u003e\n- four aluminium bushings for the front of the front subframe\u003cbr\u003e\n- two M12 steel screws with washers\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- S355 steel TIG welded and black galvanized\u003cbr\u003e\n- Aluminium bushings silver anodized\u003cbr\u003e\n- 10.9 grade M12 screws\u003cbr\u003e\n\u003cbr\u003e\nFits cars:\u003cbr\u003e\n- Audi 100 C4\u003cbr\u003e\n- Audi S4 C4\u003cbr\u003e\n- Audi UrS4 C4\u003cbr\u003e\n- Audi S6 C4\u003cbr\u003e\n- Audi UrS6 C4\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNotice: The M12 screws included in the kit are for the rear steel mounts. For the front aluminium bushings the OEM screws are to be used.\u003c\/em\u003e\u003cbr\u003e\n\u003cbr\u003e\n ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826677535069,"sku":"SBK-012","price":195.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/front-solid-subframe-bushings-for-audi-c4-sbk-012-1.jpg?v=1765197601"},{"product_id":"full-rear-wishbone-polyurethane-bushings-kit-audi-100-c4-v8-200-c3-48-mm","title":"Full rear wishbone polyurethane bushings kit - Audi 100 C4 \/ V8 \/ 200 C3 - 48 mm","description":"A set full for rear wishbone for Audi 100 C4 S4 and Audi V8 D11.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBlack set for both rear wishbones (left right) of polyurethane bushings.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for rear of car wishbones with version for 48 mm hole in the support (picture bellow).\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003ePlease look for part number of the circled part and compare with the one given bellow.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cimg class=\"aligncenter size-large wp-image-15128\" src=\"https:\/\/www.verkline.com\/wp-content\/uploads\/2015\/10\/pow-009-85-rear-wishbone-polyurethane-bushings-audi-100-c4-v8-d11-200-c3-48mm-urs4-urs6-s4-s6-4-1024x684.jpg\" alt=\"\" width=\"840\" height=\"561\"\u003e\u003cbr\u003e\n\u003cbr\u003e\n \u003cbr\u003e\n\u003cbr\u003e\n48 mm hole is possibly the part number  of the part above:\u003cbr\u003e\n- 4A0511247B\u003cbr\u003e\n- 4A0511249\u003cbr\u003e\n- 4A0511337A\u003cbr\u003e\n\u003cstrong\u003eBut it is the customer's responsibility to measure the size of the bush and order the correct size.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– 8 pices of black polyurethane bushings\u003cbr\u003e\n– stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Rear wishbones – Audi 100 C4\u003cbr\u003e\n– Rear wishbones – Audi S4\u003cbr\u003e\n– Rear wishbones – Audi S6\u003cbr\u003e\n– Rear wishbones – Audi Ur-S4\u003cbr\u003e\n– Rear wishbones – Audi Ur-S6\u003cbr\u003e\n– Rear wishbones – Audi V8 D11\u003cbr\u003e\n– Rear wishbones - Audi 200 C3","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826677567837,"sku":"POW-009-85","price":310.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-009-85-rear-wishbone-polyurethane-bushings-audi-100-c4-v8-d11-200-c3-48mm-urs4-urs6-s4-s6-1.jpg?v=1765197603"},{"product_id":"rear-differential-polyurethane-mounts-audi-100-c4-s4-v8-d11-200-c3","title":"Rear differential polyurethane mounts - Audi 100 C4 S4 \/ V8 D11 \/ 200 C3","description":"A set full for rear \u003cstrong\u003eblack\u003c\/strong\u003e polyurethane differential mounts for Audi 100 C4.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set of black rear diff mount for rear of the car.\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– black polyurethane bushings\u003cbr\u003e\n– stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Rear diff mounts – Audi 100 C4\u003cbr\u003e\n– Rear diff mounts – Audi S4\u003cbr\u003e\n– Rear diff mounts – Audi S6\u003cbr\u003e\n– Rear diff mounts – Audi Ur-S4\u003cbr\u003e\n– Rear diff mounts – Audi Ur-S6\u003cbr\u003e\n– Rear diff mounts – Audi V8 D11\u003cbr\u003e\n- Rear diff mounts - Audi 200 C3","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826677633373,"sku":"POW-010-85","price":125.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-010-85-rear-differential-polyurethane-mounts-audi-100-c4-s4-urs4-urs6-s6-1.jpg?v=1765197604"},{"product_id":"front-control-arm-polyurethane-bushings-audi-v8-d11-200-c3","title":"Front control arm polyurethane bushings - Audi V8 D11 \/ 200 C3","description":"A set for front wishbone for Audi V8 D11 or 200 C3 3B car.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBlack set for both front wishbones (left right) of polyurethane bushings.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for front car wishbones (internal and external bushings).\u003cbr\u003e\n\u003cbr\u003e\nWhat’s Included:\u003cbr\u003e\n– eight \u003cstrong\u003eblack\u003c\/strong\u003e polyurethane bushings\u003cbr\u003e\n– four centering sleeves for the polyurethane bushings\u003cbr\u003e\n– four washers\u003cbr\u003e\n– grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– polyurethane bushings\u003cbr\u003e\n– stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Front wishbone arm – Audi V8 D11\u003cbr\u003e\n- Front wishbone arm – Audi 200 C3 3B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826678092125,"sku":"POW-011-85","price":125.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-011-85-front-control-arm-polyurethane-bushings-audi-v8-d11-c3-200-2.jpg?v=1765197605"},{"product_id":"full-rear-polyurethane-bushings-set-audi-b4-b5-track-hardness","title":"Full rear polyurethane bushings set - Audi B4 B5 (track hardness)","description":"A set full for rear wishbones for Audi B4 cars including S2, RS2 and B5 A4 quattro cars with steel arms.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBlack set for all rear wishbones of polyurethane bushings for cars with steel upper arms.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for rear of car all wishbones.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eIncludes the missing bush that Powerflex does not carry !\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– 12 polyurethane bushings (wishbones not included)\u003cbr\u003e\n– black track hardness rated 85 ShA bushings\u003cbr\u003e\n\u003cbr\u003e\nFitment for cars:\u003cbr\u003e\n- Audi B3\/B4 Sedan with steel pressed rear upper arms\u003cbr\u003e\n- Audi B3\/B4 Avant with steel pressed rear upper arms\u003cbr\u003e\n- Audi RS2 with steel pressed rear upper arms\u003cbr\u003e\n- Audi B5 A4 Quattro with steel pressed rear upper arms","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826678124893,"sku":"POW-007-85","price":426.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-007-85-rear-polyurethane-wishbone-bushings-set-audi-b4-s2-rs2-b4-80-sedan-avant-1.jpg?v=1765197606"},{"product_id":"full-rear-polyurethane-bushings-set-audi-b4-cast-track","title":"Full rear polyurethane bushings set - Audi B4 - cast - track","description":"A set full for rear wishbones for Audi B4 cars including S2, RS2\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBlack set for all rear wishbones of polyurethane bushings for cars with cast upper arms.\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set for rear (left right side) of car all wishbones.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eIncludes the missing bush that Powerflex does not carry !\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– 12 black polyurethane bushings (wishbones not included)\u003cbr\u003e\n– stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment for cars:\u003cbr\u003e\n- Audi B3\/B4 Sedan with pressed cast rear upper iron arms\u003cbr\u003e\n- Audi B3\/B4 Avant with pressed cast rear upper iron arms\u003cbr\u003e\n- Audi RS2 with pressed cast rear upper iron arms","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826678157661,"sku":"POW-008-85","price":426.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-008-85-rear-polyurethane-bushings-set-audi-b4-b5-sedanavant-cast-1.jpg?v=1765197607"},{"product_id":"mitsubishi-lancer-evo-vii-ix-complete-suspension-kit","title":"Mitsubishi Lancer EVO VII-IX complete suspension kit","description":"Enhance your track performance and shave precious seconds off your lap times with our CAD engineered suspension kit for the Mitsubishi Lancer EVO VII-IX. By integrating adjustable wishbones with lightweight, tubular subframes, this kit allows you to fine-tune suspension geometry for optimal tire contact and superior handling. The adjustable wishbones enable precise camber, toe, and ride height adjustments, while the robust tubular subframes provide exceptional rigidity and reduce unsprung weight. Together, these features yield improved stability and responsiveness, ensuring that your EVO is perfectly set up for competitive racing and spirited driving.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eMitsubishi Lancer EVO VII-IX Complete Suspension Kit\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eComponents:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFront Lightweight Tubular Subframe:\u003c\/strong\u003e Standard for left-hand drive (LHD) cars; right-hand drive (RHD) versions are available upon special request.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Lightweight Tubular Subframe:\u003c\/strong\u003e Specifically designed only for the RS rear axle.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFront Tubular Adjustable Arms:\u003c\/strong\u003e Featuring a tilted pin to enhance suspension travel.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eAdjustable Rear Camber Arms\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eAdjustable Rear Toe Links\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eAdjustable Rear Lower Trailing Arms\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eChassis Integration:\u003c\/strong\u003e Mounts directly to standard OEM attachment points.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eDesign \u0026amp; Testing:\u003c\/strong\u003e Fully designed using 3D CAD and rigorously FEA tested, with additional reinforcement integrated into the original design.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eMaterial Excellence:\u003c\/strong\u003e Constructed entirely from T45 tubing and 25CrMo4 steel for ultimate strength and durability.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Camber Arms:\u003c\/strong\u003e Manufactured from 7075 billet aluminum with an anodized black finish.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePin Quality:\u003c\/strong\u003e All pins are made from 42CrMo4 steel and are galvanized in silver.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e TIG welded for precision and strength.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eMotorsport-Grade Rod Ends:\u003c\/strong\u003e Uses the same high-quality rod ends found in EVO X R4 kits by MML, produced in Europe to ensure superior performance over lower-cost alternatives.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eWeight Reduction:\u003c\/strong\u003e The front and rear tubular subframes collectively reduce the car’s weight by 25 kg compared to OEM components.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFinishing Options:\u003c\/strong\u003e Subframes and wishbones come powder coated in black, with additional color options available at an extra cost of 50 euros per item.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eImportant Notice:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eThe front subframe is not compatible with the Whiteline 26mm front anti-roll bar.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFor the RHD front subframe version, please note this incompatibility when placing your order.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eInstallation requires the removal of part of the OEM fuel tank protection to accommodate the differential mounting pipe, and minor modifications near the fuel tank may be necessary.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826678681949,"sku":"WAS-900","price":8393.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-900-1-mitsubishi-lancer-evo-vii-ix-complete-suspension-kit.jpg?v=1765197608"},{"product_id":"mitsubishi-lancer-evo-x-complete-r4-suspension-kit","title":"Mitsubishi Lancer EVO X complete R4 suspension kit","description":"Elevate your motorsport performance with the Full Suspension Kit—a solution engineered for drivers who demand uncompromising quality and reliability on the track. Developed from detailed 3D scans and fully realized in advanced CAD, this kit has been rigorously FEA tested to ensure peak performance under the most challenging conditions.\u003cbr\u003e\n\u003cbr\u003e\nExperience the perfect synergy of cutting-edge engineering and motorsport heritage with the Full Suspension Kit. Designed to deliver unmatched handling and reliability, this kit is the ultimate upgrade for drivers seeking to push their vehicles to the limit.\u003cbr\u003e\n\u003ch3\u003eEngineered for Excellence\u003c\/h3\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePremium Materials:\u003c\/strong\u003e\u003cbr\u003e\nConstructed from high-quality T45 tubing, precision-milled C45 components, and robust 25CrMo4 steel plates, every element is designed for durability and performance.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePrecision Manufacturing:\u003c\/strong\u003e\u003cbr\u003e\nCNC bending and laser cutting guarantee consistent precision, while the front arms—crafted from 7075 billet aluminum and anodized for enhanced corrosion resistance—provide an optimal balance of strength and weight reduction.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eAdvanced Welding:\u003c\/strong\u003e\u003cbr\u003e\nTIG welding with specialized weld wire for T45 tubing ensures a robust and reliable assembly.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eProven Components:\u003c\/strong\u003e\u003cbr\u003e\nPreassembled bearings and rod-ends, identical to those used in the acclaimed Rally Art MML R4 kit, deliver the performance and trust demanded by high-performance applications.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003ch3\u003eComplete Kit Components\u003c\/h3\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFront Tubular Subframe:\u003c\/strong\u003e 1 pc\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Tubular Subframe:\u003c\/strong\u003e 1 pc\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFront Aluminium Arms (LH + RH) with Outrigger Arms:\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFront ARB Links:\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Longitudinal Arms:\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Toe Arms:\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Camber Arms:\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Upper Arms (LH + RH):\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear ARB Links:\u003c\/strong\u003e 2 pcs\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cem\u003eNote: The full list of components is available at the bottom of the page.\u003c\/em\u003e\u003cbr\u003e\n\u003ch3\u003eEndorsed by Motorsport Champions\u003c\/h3\u003e\u003cbr\u003e\nOur suspension components are trusted by renowned racing teams and professionals, including:\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eHeuvel Motorsport (Evo X)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eMariusz Zapała (Fiesta Proto)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eDamian Łata (Fiesta Proto)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eFilip Nivette (Fiesta Proto)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eMichał \"Frodo\" Ratajczyk (Evo X)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eHyundai i20\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nSome of the cars that have our suspension components:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/news20161123_72294h.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-3932\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/news20161123_72294h.jpg\" alt=\"news20161123_72294h\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n- Mariusz Zapała (Fiesta Proto)\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/38a_757x482-696x443.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-3926\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/38a_757x482-696x443.jpg\" alt=\"38a_757x482-696x443\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n- Damian Łata (Fiesta Proto)\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/IMG-20170714-WA0000-1.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-4192\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/IMG-20170714-WA0000-1.jpg\" alt=\"IMG-20170714-WA0000 (1)\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n- Filip Nivette (Fiesta Proto)\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/15492031_1767553030171692_2453255531018414905_n.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-3930\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/15492031_1767553030171692_2453255531018414905_n.jpg\" alt=\"15492031_1767553030171692_2453255531018414905_n\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n- Michał \"Frodo\" Ratajczyk (Evo X)\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/ex1.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-3936\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/ex1.jpg\" alt=\"ex1\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/news20170313_74679h.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-3934\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/03\/news20170313_74679h.jpg\" alt=\"news20170313_74679h\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n- Heuvel Motorsport (Evo X) \u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2017\/04\/17796256_413215692369165_1650328758279461446_n.jpg\"\u003e\u003cbr\u003e\n\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/18699750_10209174627858804_7180341406662080686_o.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-3930\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/18699750_10209174627858804_7180341406662080686_o.jpg\" alt=\"15492031_1767553030171692_2453255531018414905_n\" width=\"800\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n- Hyundai i20\u003cbr\u003e\n\u003cbr\u003e\n \u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003e\nParts list used in our kit:\u003c\/strong\u003e\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-front-arm-assembly-right-left-CE114-105-CE114-108.png\"\u003e\u003cimg class=\"aligncenter size-full wp-image-6091\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-front-arm-assembly-right-left-CE114-105-CE114-108.png\" alt=\"lancer-evo-x-r4-front-arm-assembly-right-left-CE114-105-CE114-108\" width=\"912\" height=\"696\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n \u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eLeft-hand is red ( CE114-105 ) - 1 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-165\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-27\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm rear rod assy\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eKonelock-nut-M14x2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eKonelock nut M14x2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-173\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eARB mounting plate front arm\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm pin\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG18MTE.35\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal bearing\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-152\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront Arm adaptor bushing\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB35\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB35\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB42\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB42\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm higher pin adapter\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNL14spss-254-Nord-Lock\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNL14spss-254-Nord Lock\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRM22XE.C0\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal Rod-end M22x1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-202\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M22x1.5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eHexagon-head-bolt-ISO-8676-M10x1.25x25\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eHexagon head bolt ISO 8676 M10x1.25x25\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-155\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm rear rod ISO 8765 - M14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-72\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm RM22XE adapter\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG22SE42C0\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodoball Uniball High Misalignament\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm lower pin adapter lower\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher-UNI-8840-DIN-137-B10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher UNI 8840 - DIN 137 - B10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher-UNI-8840-DIN-137-B14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher UNI 8840 - DIN 137 - B14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n \u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRight-hand is blue ( CE114-108 ) - 1 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-26\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm RH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-27\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm rear rod assy\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eKonelock-nut-M14x2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eKonelock nut M14x2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-51\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eARB mounting plate front arm\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-65\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm pin\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG18MTE.35\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal bearing\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-152\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront Arm adaptor bushing\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB35\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB35\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB42\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB42\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm higher pin adapter\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNL14spss-254-Nord-Lock\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNL14spss-254-Nord Lock\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRM22XE.C0\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal Rod-end M22x1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-202\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M22x1.5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eHexagon-head-bolt-ISO-8676-M10x1.25x25\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eHexagon head bolt ISO 8676 M10x1.25x25\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-155\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm rear rod ISO 8765 - M14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-72\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm RM22XE adapter\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG22SE42C0\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodoball Uniball High Misalignment\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eFront arm lower pin adapter lower\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher-UNI-8840-DIN-137-B10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher UNI 8840 - DIN 137 - B10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher-UNI-8840-DIN-137-B14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWasher UNI 8840 - DIN 137 - B14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-front-anti-roll-bar-link-CE114-109.png\"\u003e\u003cimg class=\"aligncenter size-full wp-image-6092\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-front-anti-roll-bar-link-CE114-109.png\" alt=\"lancer-evo-x-r4-front-anti-roll-bar-link-CE114-109\" width=\"1001\" height=\"789\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eFront anti-roll bar link ( CE114-109 ) - 2 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE113-202\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRollbar link EVO\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eHigh Misalignment uniball\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRollbar link ARYT7 adapter\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\nFront subframe ( CE114-110 ) - 1 pcs\u003cbr\u003e\n\u003cbr\u003e\n\u003cimg class=\"aligncenter size-large wp-image-14045\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2018\/11\/Front-tubular-subframe-r4-lanver-evo-x-CE114-110-was-801-1-1024x684.jpg\" alt=\"\" width=\"840\" height=\"561\"\u003e\u003cbr\u003e\n\u003cbr\u003e\nRear subframe (CE114-119 ) - 1 pcs - Needs mechanical RS rear differential.\u003cbr\u003e\n\u003cbr\u003e\n\u003cimg class=\"aligncenter size-large wp-image-14048\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2018\/11\/rear-tubular-subframe-r4-lancer-evo-x-CE114-119-was-806-3-1024x684.jpg\" alt=\"\" width=\"840\" height=\"561\"\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-camber-arm-CE114-115.png\"\u003e\u003cimg class=\"aligncenter size-full wp-image-6093\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-camber-arm-CE114-115.png\" alt=\"lancer-evo-x-r4-rear-camber-arm-CE114-115\" width=\"890\" height=\"711\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRear Camber Arms ( CE114-115 ) - 2 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-177\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCamber rod adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-178\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCamber rod adapter on upright\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRML16MTEx1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRod-end M16x1,5 LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRM16MTEx1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRod-end M16x1,5 RH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-181\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M16x1.5 LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-180\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M16x1.5 RH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-162\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eComplete camber rod\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-longitudinal-arm-CE114-117.png\"\u003e\u003cimg class=\"aligncenter size-full wp-image-6094\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-longitudinal-arm-CE114-117.png\" alt=\"lancer-evo-x-r4-rear-longitudinal-arm-CE114-117\" width=\"980\" height=\"675\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRear Longitudinal Arm ( CE114-117 ) - 2 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-168\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear Fork on hub\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG14MTE.MM29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal 29-14\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRM22XE.C0\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal M22x1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-186\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eComplete longitudinal rod\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-182\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eLongitudinal link adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-185\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eLongitudinal link adapter on chassis\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-202\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M22x1.5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-toe-arm-CE114-112.png\"\u003e\u003cimg class=\"aligncenter size-full wp-image-6095\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-toe-arm-CE114-112.png\" alt=\"lancer-evo-x-r4-toe-arm-CE114-112\" width=\"774\" height=\"657\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRear Toe Arm Assembly ( CE114-112 ) - 2 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-168\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear Fork on hub\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRM16MTEx1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal con gambo maschio M16x1,5 RH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRML16MTEx1,5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal con gambo maschio M16x1,5 LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-177\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCamber rod adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-181\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M16x1.5 LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-180\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M16x1.5 RH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-183\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003etoe rod adapter on upright\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-160\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eComplete toe rod\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-upper-arm-CE114-231-CE114-230.jpg\"\u003e\u003cimg class=\"aligncenter size-large wp-image-6096\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-upper-arm-CE114-231-CE114-230-1024x761.jpg\" alt=\"lancer-evo-x-r4-rear-upper-arm-CE114-231-CE114-230\" width=\"860\" height=\"639\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRear Upper Arm RH Assembly ( CE114-230 ) - 1 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-164\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear fork\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-182\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eLongitudinal link adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-273\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear upper arm adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-118\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eUpper rear A-arm RH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG14MTE.MM29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal 29-14 bearing\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n \u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRear Upper Arm LH Assembly ( CE114-231 ) - 1 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-164\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear fork\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-182\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eLongitudinal link adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-273\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear upper arm adapter on frame\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-114\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eUpper rear A-arm LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRG14MTE.MM29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal 29-14 bearing\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger-SB29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eSeeger SB29\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n\u003ca href=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-roll-bar-link-CE114-204.png\"\u003e\u003cimg class=\"aligncenter size-full wp-image-6097\" src=\"http:\/\/verkline.com\/wp-content\/uploads\/2015\/12\/lancer-evo-x-r4-rear-roll-bar-link-CE114-204.png\" alt=\"lancer-evo-x-r4-rear-roll-bar-link-CE114-204\" width=\"811\" height=\"643\"\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003ctable dir=\"ltr\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"298\"\u003e \u003ccol width=\"368\"\u003e \u003ccol width=\"100\"\u003e\n\u003c\/colgroup\u003e\n\u003cbr\u003e\n\u003ctbody\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"4\" rowspan=\"1\"\u003eRear ARB link Assembly ( CE114-204 ) - 2 pcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd colspan=\"3\" rowspan=\"1\"\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003epcs\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-195\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRear ARB rod\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-190\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M12x1.25 LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eCE114-189\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eNut M12x1.25\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal M12x1.25 LH\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRodobal M12x1.25\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003ctr\u003e\n\u003cbr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eWAS-805-02\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003eRollbar link adapter\u003c\/td\u003e\n\u003cbr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003cbr\u003e\n\u003c\/tr\u003e\n\u003cbr\u003e\n\u003c\/tbody\u003e\n\u003cbr\u003e\n\u003c\/table\u003e\u003cbr\u003e\n ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826678976861,"sku":"WAS-800","price":13744.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-800-1-mitsubishi-lancer-evo-x-complete-r4-suspension-kit.jpg?v=1765197610"},{"product_id":"audi-b4-b5-rear-bottom-bushes-for-wheel-bearing-housing-track-hardness","title":"Audi B4 \/ B5 rear bottom bushes for wheel bearing housing (track hardness)","description":"This is a \u003cstrong\u003eset (left and right housings)\u003c\/strong\u003e of missing bush that is not sold by Powerflex. If you have a a kit by them you are missing this poliurethane bush in your rear suspension.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0505171 or 8D0505171C\u003cbr\u003e\n\u003cbr\u003e\nThis is the outer bush that goes into the bottom of the wheel bearing housing.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two black Polyurethane bushings\u003cbr\u003e\n- two centering sleeves for the Polyurethane bushings\u003cbr\u003e\n- four washers\u003cbr\u003e\n- grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi 80 Quattro B4 Avant\u003cbr\u003e\n- Audi 80 Quattro B4 Sedan\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi A4 B5 Quattro\u003cbr\u003e\n- Audi S4 B5\u003cbr\u003e\n- Audi RS4 B5\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0 505 171","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826679468381,"sku":"POW-015-85","price":62.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-015-85-audi-b4-b5-rear-bottom-bush-for-wheel-bearing-housing-a4-s4-rs4-1.jpg?v=1765197611"},{"product_id":"audi-quattro-rear-differential-mount-audi-b3b4-coupe-track-hardness","title":"Audi Quattro rear differential mount - Audi B3\/B4 coupe - track hardness","description":"Audi Quattro rear differential polyurethane mount.\u003cbr\u003e\n\u003cbr\u003e\nUnlike other products on the market this one fits perfectly on the both sides of the aluminium casting and on to for subframe metal mount. Our product is precisely undercut to fit the rear diff gearbox support. Other products have the same width of the outer edge and this makes it bad fit for the subframe mount.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nOEM part is N\/A but it was used in rear gearbox support part number 895599125\u003cbr\u003e\n\u003cbr\u003e\nIt can be also used with Audi Sport Quattro replica mounting (upside down) to the car body.\u003cbr\u003e\n\u003cbr\u003e\nWhat’s Included:\u003cbr\u003e\n– Black polyurethane bushing for rear gearbox support  (aluminium arm not included)\u003cbr\u003e\n– grease for fittings the bushing\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Audi B2 Coupe Quattro\u003cbr\u003e\n- Audi Ur-Quattro\u003cbr\u003e\n– Audi B3 Coupe Quattro\u003cbr\u003e\n– Audi B4 Coupe Quattro\u003cbr\u003e\n- Audi S2 Coupe\u003cbr\u003e\n\u003cbr\u003e\nNotice: Audi made rear diff mount housing in two sizes, our mount is made to fit for the larger housing, smaller housing will is 0.5mm in diameter smaller and you will need to shim it with a sanding drum or roll.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826679501149,"sku":"POW-012-85","price":45.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-012-85-audi-quattro-rear-differential-mount-s2-b4-80-90-1.jpg?v=1765197612"},{"product_id":"front-anti-roll-bar-polyurethane-bushings-26-mm-audi-v8-d11-c3-100-200-track-hardness","title":"Front anti roll bar polyurethane bushings 26 mm - Audi V8 D11 \/ C3 100 200 (track hardness)","description":"A set for front anti roll bar 26 mm bushings for Audi V8 D11 and Audi C3 100 \/ 200.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally with performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThis is a full set of two front anti roll bar polyurethane bushings for 26 mm bar.\u003cbr\u003e\n\u003cbr\u003e\nWhat’s Included:\u003cbr\u003e\n– two black Polyurethane bushings\u003cbr\u003e\n– grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– polyurethane bushings\u003cbr\u003e\n– black track hardness 85 ShA rated bushings\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Front 26 mm anti-roll bar – Audi V8 D11 (1989-1994)\u003cbr\u003e\n- Front 26 mm anti-roll bar - Audi C3 100 (1990-1991)\u003cbr\u003e\n- Front 26 mm anti-roll bar - Audi C3 100 Quattro (1985-1991)\u003cbr\u003e\n- Front 26 mm anti-roll bar - Audi C3 200 (1985-1991)\u003cbr\u003e\n\u003cbr\u003e\nReplaces OEM part number: 447 411 327B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826679566685,"sku":"POW-014-85","price":48.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-014-85-front-anti-roll-bar-polyurethane-bushings-26-mm-audi-v8-d11-c3-100-200-2.jpg?v=1765197613"},{"product_id":"rear-diff-mounting-polyurethane-bushings-audi-38-mm-track-hardness","title":"Rear diff mounting polyurethane bushings - Audi - 38 mm - track hardness","description":"A set for rear differential mounting for Audi Audi  100 \/ 200 \/ S4 \/ S6\/ V8 D11\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally with performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nOEM part numbers 183199381A and 441199381E used in rear diff housing part number 443525325B\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eThe inside diameter is 38 mm.\u003c\/strong\u003e Inside diameter 55 mm is \u003ca href=\"http:\/\/verkline.com\/shop\/all-parts\/bushings\/rear-diff-mounting-polyurethane-bushings-audi-c4-s4-s6\/\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\n\u003cbr\u003e\nWhat’s Included:\u003cbr\u003e\n– bonded polyurethane bushing for rear diff\u003cbr\u003e\n– grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– polyurethane bushing\u003cbr\u003e\n– yellow track hardness 85 ShA rated bushing\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Rear differential housing – Audi V8 D11 (1989 - 1994)\u003cbr\u003e\n– Rear differential housing – Audi 100 Quattro (1985 - 1991)\u003cbr\u003e\n– Rear differential housing – Audi 200 Quattro (1985 - 1991)\u003cbr\u003e\n– Rear differential housing – Audi S6 C4 (1995 - 1997)\u003cbr\u003e\n\u003cbr\u003e\nOEM part numbers 183 199 381 A and 441 199 381 E\u003cbr\u003e\nHousing part number 443 525 325 B\u003cbr\u003e\n\u003cbr\u003e\nNotice: There should be two washers installed on both sides of the bush. One OEM and one we provide with the package.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826679632221,"sku":"POW-013-85","price":56.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-013-85-rear-diff-mounting-polyurethane-bushings-audi-v8-d11-1.jpg?v=1765197615"},{"product_id":"rear-diff-mounting-polyurethane-bushings-audi-55mm-track-hardness","title":"Rear diff mounting polyurethane bushings - Audi - 55mm - track hardness","description":"A set for rear differential mounting for Audi C4 100 \/ 200 \/ S4 \/ S6 - in black - track hardness - 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally with performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThe poli bush is made for rear diff housing part number 443599125 and replaces 443599247A.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eInside diameter 55 mm.\u003c\/strong\u003e Inside diameter 38 mm is \u003ca href=\"\/shop\/all-parts\/bushings\/rear-diff-mounting-polyurethane-bushings-audi-v8-d11\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\n\u003cbr\u003e\nWhat’s Included:\u003cbr\u003e\n– bonded black polyurethane bushings (two pice)\u003cbr\u003e\n– metal sleeve\u003cbr\u003e\n– washer for the bushing\u003cbr\u003e\n– grease for fittings the bushings in the wishbone\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n– polyurethane bushings\u003cbr\u003e\n– stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n– Rear differential housing – Audi C4 100 Quattro (1988 - 1994)\u003cbr\u003e\n– Rear differential housing – Audi C4 200 Quattro (1988 - 1991)\u003cbr\u003e\n– Rear differential housing – Audi C4 S4 Quattro (1992 - 1994)\u003cbr\u003e\n– Rear differential housing – Audi C4 S6 Quattro (1995 - 1997)\u003cbr\u003e\n\u003cbr\u003e\nHousing part number 443 599 125 Replaces 443 599 247 A\u003cbr\u003e\n\u003cbr\u003e\nNotice: There should be two washers installed on both sides of the bush. One OEM and one we provide with the package.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826680156509,"sku":"POW-017-85","price":57.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-017-85-rear-diff-mounting-polyurethane-bushings-audi-c4-s4-s6-1.jpg?v=1765197616"},{"product_id":"front-anti-roll-bar-bush-28mm-track-hardness","title":"Front anti roll bar bush 28mm - track hardness","description":"Set for one front anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8A0411327\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two black polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 28 mm\u003cbr\u003e\n- track stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- 28mm front ARB - Audi B2\/B3\/B4\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8A0 411 327","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826680222045,"sku":"POW-020-85","price":40.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-020-85-front-arb-28mm-polyurethane-bushes-audi-rs2-1.jpg?v=1765197617"},{"product_id":"front-arb-26-mm-polyurethane-bushes-audi-b4-track-hardness","title":"Front ARB 26 mm polyurethane bushes - Audi B4 - track hardness","description":"Set for one front anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 811411327B\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two black polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 26 mm\u003cbr\u003e\n- stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- 26mm front ARB - Audi B2\/B3\/B4\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 811 411 327 B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826680320349,"sku":"POW-019-85","price":40.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-019-85-front-arb-26-mm-polyurethane-bushes-audi-s2-1.jpg?v=1765197618"},{"product_id":"rear-anti-roll-bar-bush-16mm-track-hardness","title":"Rear anti roll bar bush 16mm (track hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8A0511327E\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- black polyurethane bushings size 16 mm\u003cbr\u003e\n- track hardness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant with 16 mm rear ARB\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi A4\/S4\/RS4 B5 Quattro with 16 mm rear ARB\u003cbr\u003e\n- Audi A6\/S6 C5 Quattro with 16 mm rear ARB\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8A0 511 327 E","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826680811869,"sku":"POW-053-85","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-053-85-rear-arb-16-mm-polyurethane-bushes-audi-s2-b4-sedan-avant-1.jpg?v=1765197620"},{"product_id":"rear-inner-track-rod-bushes-track-hardness","title":"Rear inner track rod bushes - track hardness","description":"Set for one car of inner rear track rod bushings (2 pcs) in polyurethane.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. Used in OEM part nr 8D0501530\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- \u003cstrong\u003etwo\u003c\/strong\u003e black polyurethane bushings with metal sleeve\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant Quattro\u003cbr\u003e\n- Audi RS2\u003cbr\u003e\n- Audi A4 B5 Quattro\u003cbr\u003e\n- Audi S4 B5\u003cbr\u003e\n- Audi RS4 B5\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0 501 530","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826680942941,"sku":"POW-060-85","price":69.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-060-85-rear-inner-track-rod-bushes-8d0501530-1.jpg?v=1765197621"},{"product_id":"polyurethane-subframe-bushings-b2b3b4-m10-track-hardness-black","title":"Polyurethane subframe bushings B2\/B3\/B4 - M10 - track hardness black","description":"Set for one subrame of Polyurethane Subframe Bushings - size M10.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThey can be used to maintain the stock suspension comfort.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 4 pices of \u003cstrong\u003eblack\u003c\/strong\u003e polyurethane bushings (10 mm bolt) that work with one of the cars axles\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n- Track hardness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi B2\u003cbr\u003e\n- Audi B3\u003cbr\u003e\n- Audi B4 with M10 bolt","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681008477,"sku":"POW-018-85","price":102.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-018-85-polyurethane-subframe-bushings-b2-b3-b4-90-80-audi-s2-rs2-1.jpg?v=1765197622"},{"product_id":"full-front-polyurethane-wishbones-bushings-kit-audi-track-hardness","title":"Full front polyurethane wishbones bushings  kit - Audi - track hardness","description":"Full set of \u003cstrong\u003eBLACK\u003c\/strong\u003e polyurethane bushings for the front wishbones - 10 pieces set. Wishbones not included.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- Front Lower Arm Inner Bushes (2 pcs.)\u003cbr\u003e\n- Front Upper Arm To Chassis Bushes (4 pcs.)\u003cbr\u003e\n- Front Lower Shock Mounts (2 pcs.)\u003cbr\u003e\n- Front Tie Bar Rear Bushes (2 pcs.)\u003cbr\u003e\n- Grease for fittings the bushings\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n- Track hardness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi A4 B5\u003cbr\u003e\n- Audi S4 B5\u003cbr\u003e\n- Audi RS4 B5\u003cbr\u003e\n- Audi A6 C5\u003cbr\u003e\n- Audi S6 C5\u003cbr\u003e\n- Audi RS6 C5\u003cbr\u003e\n- VW Passat B5\u003cbr\u003e\n- VW Passat B6\u003cbr\u003e\n\u003cbr\u003e\nOEM parts nr:\u003cbr\u003e\n4D0407181H\u003cbr\u003e\n4D0407182E\u003cbr\u003e\n4D0407183\u003cbr\u003e\n4B0407515\u003cbr\u003e\n8D0407515A\u003cbr\u003e\n8D0407515B\u003cbr\u003e\n4D0407182E\u003cbr\u003e\n4D0407183P\u003cbr\u003e\n4D0407183AB\u003cbr\u003e\n4D0407183Q\u003cbr\u003e\n4D0407183AA","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681041245,"sku":"POW-055-85","price":414.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-055-85-full-front-polyurethane-wishbones-bushings-kit-audi-a4-s4-rs5-b5-1.jpg?v=1765197624"},{"product_id":"front-anti-roll-bar-bush-audi-29mm-track-hardness","title":"Front anti roll bar bush Audi 29mm (track hardness)","description":"Set for one front anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 4D0411327\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 29 mm\u003cbr\u003e\n- black track hardness 85 ShA rated bushings\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi S4 B5 with  29 mm front ARB\u003cbr\u003e\n- Audi RS4 B5 with 29 mm front ARB\u003cbr\u003e\n- Audi A4 B6  with 29 mm front ARB\u003cbr\u003e\n- Audi S4 B6  with 29 mm front ARB\u003cbr\u003e\n- Audi A4 B7  with 29 mm front ARB\u003cbr\u003e\n- Audi S4 B7  with 29 mm front ARB\u003cbr\u003e\n- Audi RS4 B7 with 29 mm front ARB\u003cbr\u003e\n- Audi A6 C5 with 29 mm front ARB\u003cbr\u003e\n- Audi S6 C5 with 29 mm front ARB\u003cbr\u003e\n- Audi RS6 C5 with 29 mm front ARB\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 4D0 411 327","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681106781,"sku":"POW-050-85","price":45.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-050-85-front-arb-29-mm-polyurethane-bushes-a4-s4-rs4-b5.jpg?v=1765197625"},{"product_id":"rear-anti-roll-bar-bush-15mm-track-hardness","title":"Rear anti roll bar bush 15mm (track hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8D0511327D\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 15 mm\u003cbr\u003e\n- black track hardness 85 ShA rated bushings\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant with 15 mm rear ARB\u003cbr\u003e\n- Audi A4\/S4\/RS5 B5 Quattro with 15 mm rear ARB\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0 511 327 D","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681565533,"sku":"POW-054-85","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-053-85-rear-arb-16-mm-polyurethane-bushes-audi-s2-b4-sedan-avant-2_5fe68a5c-bbf6-4b92-a4b1-199ceaad6b07.jpg?v=1765197626"},{"product_id":"polyurethane-subframe-bushings-b4-m12-track-hardness","title":"Polyurethane subframe bushings B4 - M12 - track hardness","description":"Set for one subrame of Polyurethane Subframe Bushings - size M12.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment.\u003cbr\u003e\n\u003cbr\u003e\nThey can be used to maintain the stock suspension comfort.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 4 pices of black polyurethane bushings (12 mm bolt) that work with one of the cars axles\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n- Track Hardness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\nFitment:\u003cbr\u003e\n- Audi B4 with M12 bolt","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681598301,"sku":"POW-024-85","price":102.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-024-85-polyurethane-subframe-bushings-b4-m12-audi-s2-rs2-80-90-1.jpg?v=1765197627"},{"product_id":"front-tubular-wishbones-lancer-evo-vii-ix","title":"Front tubular wishbones - Lancer EVO VII-IX","description":"\u003cstrong\u003eMitsubishi Lancer EVO VII-IX Front Tubular Wishbones\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\nEnhance your vehicle's suspension performance with our premium Front Tubular Wishbones, specifically engineered for the Mitsubishi Lancer EVO VII-IX. This comprehensive kit includes all the components displayed in the images and offers superior rigidity and enhanced performance compared to OEM parts. Upgrade your suspension with our expertly engineered wishbones for a noticeable improvement in handling and performance.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Components:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFront Lightweight Tubular Wishbones:\u003c\/strong\u003e Available for both left and right sides.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eExtended Height Pins:\u003c\/strong\u003e Two pins for uprights, providing an additional 10 mm for improved suspension kinematics.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eMotorsport C0 Tight Fit Rod Ends:\u003c\/strong\u003e Four M18 rod ends manufactured in Europe for exceptional quality.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eScrew Locking Nuts:\u003c\/strong\u003e Four M18 half-size locking nuts for secure assembly.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eSpacer Sleeves:\u003c\/strong\u003e Four sleeves for integrating the rod ends with the front subframe.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eTeflon Lined Spherical Plain Bearings:\u003c\/strong\u003e Two M22 bearings designed to be vibration and resonance resistant.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePreassembled:\u003c\/strong\u003e The kit comes fully assembled and is ready for installation.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eEnhanced Suspension Travel:\u003c\/strong\u003e The tilted pin design allows for increased suspension travel.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eAdjustability:\u003c\/strong\u003e Facilitates greater caster and camber adjustments.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Can be used with the standard front subframe.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eSuperior Strength:\u003c\/strong\u003e Delivers greater strength and rigidity compared to OEM wishbones.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Fully developed using advanced 3D CAD software.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e FEA tested with additional reinforcement beyond the original design.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Manufactured from T45 tubing and S355 steel for optimal durability.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e All components are TIG welded for precision and strength.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePins:\u003c\/strong\u003e Made from high-strength steel and finished with a KTL coating.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eWeight Comparison:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eOEM Wishbones:\u003c\/strong\u003e Approximately 3.10 kg.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eOur Wishbones:\u003c\/strong\u003e Weigh 2.95 kg while offering enhanced rigidity.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eFinish Options:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e Powder coated in black for a sleek, durable finish.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eCustom:\u003c\/strong\u003e Alternative color options are available for an additional €50 (RAL paint code required).\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826681696605,"sku":"WAS-903-904","price":1199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-903-904-12-front-tubular-wishbones-lancer-evo-vii-ix.jpg?v=1765197628"},{"product_id":"adjustable-rear-camber-arms-lancer-evo-iv-ix","title":"Adjustable rear camber arms - Lancer EVO IV-IX","description":"\u003cstrong\u003eMitsubishi Lancer EVO IV-IX Fully Adjustable Rear Camber Arms\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nElevate your vehicle's performance with our high-precision fully adjustable rear camber arms, engineered specifically for the Mitsubishi Lancer EVO IV-IX. Designed for both track enthusiasts and daily drivers seeking enhanced handling, these camber arms deliver exceptional adjustability and durability, ensuring optimal tire contact and improved cornering stability.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhy Choose Our Rear Camber Arms?\u003c\/strong\u003e\u003cbr\u003e\nOur fully adjustable rear camber arms are crafted to maximize your vehicle’s handling and stability. With meticulous engineering and premium materials, they provide the precision, strength, and ease of adjustment that discerning drivers demand. Upgrade your Mitsubishi Lancer EVO IV-IX today and experience the difference in performance and quality.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eAluminum Rear Camber Arms:\u003c\/strong\u003e Lightweight, precision-engineered arms for both left and right sides\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eM22x1.5 Motorsport Rod Ends:\u003c\/strong\u003e Two forged steel rod ends with a pre-loaded tight fit, offering superior responsiveness and durability\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eM22 Locking Nuts:\u003c\/strong\u003e Two high-quality locking nuts for secure installation\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eM20 Teflon-Lined Spherical Plain Bearings:\u003c\/strong\u003e Four bearings engineered to minimize vibration and resonance\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRubber Caps:\u003c\/strong\u003e Two protective caps for enhanced rod end longevity\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePrecision Camber Adjustability:\u003c\/strong\u003e Integrated turnbuckle screw allows for effortless, fine-tuned adjustments while installed, optimizing suspension geometry.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePre-Assembled for Convenience:\u003c\/strong\u003e The kit arrives fully assembled and ready for installation, saving you time and effort.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed to work seamlessly with standard rear subframes and uprights.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eEnhanced Durability:\u003c\/strong\u003e Engineered to offer significantly greater strength than OEM components, ensuring reliable performance even under the most demanding conditions.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Fully developed using advanced 3D CAD software\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e FEA tested with additional reinforcement incorporated into the original design\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e CNC machined from high-grade 7075 aluminum\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Anodized in sleek black for a durable, high-quality appearance\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826682188125,"sku":"WAS-905","price":795.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-905-1-rear-adjustable-camber-arms-lancer-evo-iv-ix_a26394f9-8887-4a9e-8f85-cefbd141cae7.jpg?v=1765197629"},{"product_id":"adjustable-rear-toe-links-lancer-evo-iv-ix","title":"Adjustable rear toe links - Lancer EVO IV-IX","description":"\u003cstrong\u003eMitsubishi Lancer EVO IV-IX Toe Links\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nUpgrade your vehicle’s handling and track performance with our precision-engineered toe links for the Mitsubishi Lancer EVO IV-IX. Designed for drivers who demand superior adjustability and durability, these toe links allow you to fine-tune your alignment for maximum grip and optimal performance on the track.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eWhy Adjustable Toe Matters:\u003c\/strong\u003e\u003cbr\u003e\nPrecise toe adjustment is crucial for achieving peak track performance. By optimizing the toe angle, you can improve the tire’s contact patch, enhance steering response, and boost cornering stability. This fine-tuning allows for improved grip and reduced tire wear, ensuring your car performs at its best under demanding conditions.\u003cbr\u003e\n\u003cbr\u003e\nInvest in our high-performance toe links to experience the ultimate in handling precision and durability. Elevate your Mitsubishi Lancer EVO IV-IX’s performance on the track and enjoy a competitive edge with every lap.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eRear lightweight T45 steel 35 mm toe link wishbones (left and right)\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo C45 steel arm fixing mounts\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFour M16 rod ends forged for motorsport quality, pre-loaded with a tight fit\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFour M16 half-size screw locking nuts\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFour spacer sleeves for secure assembly on the rear subframe\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePreassembled for Convenience:\u003c\/strong\u003e Ready for immediate installation, saving you time and effort.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eR4 Rally Kit Compliant:\u003c\/strong\u003e Meets FIA homologation standards for the Lancer EVO IX, ensuring top-level performance.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eEnhanced Adjustability:\u003c\/strong\u003e Offers an extensive range of toe adjustments, allowing you to tailor your suspension geometry to suit specific track conditions.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eSuperior Strength:\u003c\/strong\u003e Engineered to deliver greater durability and rigidity compared to OEM wishbones.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eTechnical Details:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFully designed using advanced 3D CAD software\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFEA tested with additional reinforcements integrated into the design\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eManufactured from high-quality T45 steel\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003ePowder coated in a sleek black finish (alternative color options available at 50 euro\/usd)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826682220893,"sku":"WAS-906","price":799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-906-1-adjustable-rear-toe-links-lancer-evo-iv-ix_6bbd374b-6771-4b13-b633-67a1b0fb39ae.jpg?v=1765197630"},{"product_id":"adjustable-rear-outrigger-arms-lancer-evo-iv-ix","title":"Adjustable rear outrigger arms - Lancer EVO IV-IX","description":"\u003cstrong\u003eAdjustable Rear Outrigger Arms – Mitsubishi Lancer EVO IV-IX\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nElevate your vehicle’s track performance with our precision-engineered adjustable rear outrigger arms, specifically designed for the Mitsubishi Lancer EVO IV-IX. These components are crafted to ensure maximum rigidity and optimal suspension geometry, delivering improved handling and enhanced stability on the track.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eBenefits for Track Performance:\u003c\/strong\u003e\u003cbr\u003e\nRigid outriggers play a critical role in maintaining precise suspension geometry during high-speed cornering. By reducing chassis flex, these arms help preserve optimal tire contact and alignment, leading to improved grip, predictable handling, and faster lap times. Invest in our adjustable rear outrigger arms to experience a noticeable enhancement in performance, stability, and overall driving dynamics.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo rear lightweight T45 steel 35 mm outrigger wishbones (left and right)\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo C45 steel arm fixing mounts\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo M22 rod ends featuring a forged steel body, pre-loaded for a tight fit and motorsport quality performance\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo M22 half-size screw locking nuts\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo ultra-high performance uniball bearings\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eEight spacer sleeves for seamless assembly on the rear subframe\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003ePreassembled and Ready for Installation:\u003c\/strong\u003e Designed for straightforward fitment, saving you time and effort.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eR4 Rally Kit Compliant:\u003c\/strong\u003e Meets FIA homologation requirements for the Lancer EVO IV-IX, ensuring top-tier performance.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Easily integrates with standard rear chassis and upright pickup points.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eEnhanced Strength:\u003c\/strong\u003e Engineered to provide significantly greater durability compared to OEM wishbones, ensuring reliability under extreme track conditions.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eTechnical Details:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFully designed using advanced 3D CAD software\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFEA tested with additional reinforcement to surpass the original design specifications\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eManufactured from high-grade T45 steel\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003ePowder coated in sleek black as standard (alternative color options available for an additional €50\/USD; RAL paint code required)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nUpgrade your Mitsubishi Lancer EVO IV-IX with our state-of-the-art rear outrigger arms and take your track performance to the next level.","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826682253661,"sku":"WAS-907","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-907-1-adjustable-rear-outrigger-arm-lancer-evo-iv-ix_ff07266c-911d-469f-9920-eb978d646b43.jpg?v=1765197632"},{"product_id":"mitsubishi-lancer-evo-iv-ix-rear-turbular-subframe","title":"Mitsubishi Lancer EVO IV-IX - rear turbular subframe","description":"\u003cstrong\u003eMitsubishi Lancer EVO IV-IX – Rear Lightweight Tubular Subframe\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\nEnhance your vehicle's performance with our precision-engineered \u003cstrong\u003eRear Lightweight Tubular Subframe\u003c\/strong\u003e, designed specifically for the \u003cstrong\u003eMitsubishi Lancer EVO IV-IX\u003c\/strong\u003e. This high-performance upgrade significantly reduces weight while maintaining structural integrity and durability.\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\u003cstrong\u003eRear Lightweight Tubular Subframe\u003c\/strong\u003e\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eRear Anti-Roll Bar Mounts\u003c\/strong\u003e (integrated into the subframe)\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eDirect fitment using \u003cstrong\u003eOEM mounting points\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003e3D CAD-designed\u003c\/strong\u003e for optimal strength and fitment\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eFEA tested\u003c\/strong\u003e and reinforced beyond the original design for enhanced durability\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eConstructed from \u003cstrong\u003eT45 tubing, C45 milled steel\u003c\/strong\u003e for superior strength\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eTIG welded\u003c\/strong\u003e for maximum precision and reliability\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003ePerformance \u0026amp; Weight Savings:\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\nOur rear tubular subframe offers a \u003cstrong\u003eweight reduction of 20 kg\u003c\/strong\u003e compared to OEM components, weighing just \u003cstrong\u003e9.4 kg\u003c\/strong\u003e. It is specifically designed for use only with the \u003cstrong\u003eRS rear axle\u003c\/strong\u003e.\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003eFinish \u0026amp; Customization:\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Durable black powder coating\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request for an additional \u003cstrong\u003e€50\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003ch3\u003e\u003cstrong\u003eImportant Fitment Notice:\u003c\/strong\u003e\u003c\/h3\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eMinor modifications may be required near the fuel tank for proper installation\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eDepending on the vehicle version, removal of the \u003cstrong\u003eleft-side OEM fuel tank cover\u003c\/strong\u003e may be necessary\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nUpgrade your \u003cstrong\u003eEVO IV-IX\u003c\/strong\u003e with a lightweight, high-strength subframe designed for \u003cstrong\u003eimproved handling and performance\u003c\/strong\u003e.\u003cbr\u003e\n\u003cbr\u003e\n ","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826682319197,"sku":"WAS-902","price":1795.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-902-5-mitsubishi-lancer-evo-iv-ix-rear-turbular-subframe_b84c45b4-180e-4273-b38e-bb332ffdd614.jpg?v=1765197633"},{"product_id":"mitsubishi-lancer-evo-vii-ix-front-turbular-subframe","title":"Mitsubishi Lancer EVO VII-IX - front turbular subframe","description":"\u003cstrong\u003eMitsubishi Lancer EVO IV-IX – Front Lightweight Tubular Subframe\u003c\/strong\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003cbr\u003e\nUpgrade your Mitsubishi Lancer EVO IV-IX with our high-performance Front Lightweight Tubular Subframe, designed to reduce weight while maintaining superior strength and rigidity. Engineered using advanced 3D CAD design and FEA testing, this subframe is reinforced beyond the original design specifications to ensure exceptional durability on the track. Enhance your vehicle’s performance with our precision-engineered subframe, designed for those who demand quality and efficiency on the track.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFront Lightweight Tubular Subframe for left-hand drive (LHD) vehicles\u003cbr\u003e\n\u003cem\u003e(Right-hand drive (RHD) version available upon request for markets such as the UK, Australia, Japan, etc.)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTwo aluminum mounting brackets for the steering rack\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eThree steel mounting brackets for the steering rack\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Attaches to the chassis via standard attachment points\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Fully developed using 3D CAD software\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e FEA tested with additional reinforcements incorporated\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Constructed from T45 tubing and S355 steel sheets\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003e\n\u003cstrong\u003eWelding:\u003c\/strong\u003e TIG 141 welded for high precision and strength\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003ePerformance Benefits:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eWeight reduction of approximately 5 kg compared to OEM components\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eTotal subframe weight: 8.45 kg\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003ePowder-coated in black as standard for enhanced corrosion resistance and aesthetics\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eAlternative color options available for an additional 50 euro\/usd.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cstrong\u003eImportant Notice:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cbr\u003e\n \t\u003cli\u003eThis front subframe is not compatible with the Whiteline 26mm front anti-roll bar.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eFor the RHD version, please indicate your requirements when placing the order.\u003c\/li\u003e\n\u003cbr\u003e\n \t\u003cli\u003eInstallation requires the use of our WAS-903-904 wishbones or other adjustable wishbones that offer camber\/caster adjustment.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826682777949,"sku":"WAS-901","price":1895.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/was-901-1-mitsubishi-lancer-evo-vii-ix-front-turbular-subframe_cc0c5e8b-989e-4d0a-976c-a93b28a23df5.jpg?v=1765197634"},{"product_id":"rear-anti-roll-bar-bush-125mm-track-hardness","title":"Rear anti roll bar bush 12,5mm (track hardness)","description":"Set for one rear anti-roll bar of polyurethane bushings.\u003cbr\u003e\n\u003cbr\u003e\nPolyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. OEM part nr 8D0511327C or 8A0511327B\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cbr\u003e\n- two black polyurethane bushings\u003cbr\u003e\n- grease for fittings the bushings in to anti-roll bar\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n- polyurethane bushings size 12,5 mm\u003cbr\u003e\n- stiffness rated 85 ShA\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e\n- Audi B4 Sedan\/Avant with 12,5 mm rear Anti-roll Bar\u003cbr\u003e\n\u003cbr\u003e\nOEM part nr 8D0 511 327C or 8A0 511 327B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826682810717,"sku":"POW-021-85","price":34.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-053-85-rear-arb-16-mm-polyurethane-bushes-audi-s2-b4-sedan-avant-3_18fd18d9-8718-4b66-b540-254260dd400d.jpg?v=1765197635"},{"product_id":"polyurethane-rear-subframe-bushings-audi-c4-s4s6urs4urs6-v8-d11-200-c3-street","title":"Polyurethane rear subframe bushings Audi C4 (S4\/S6\/UrS4\/UrS6) \/ V8 (D11) \/ 200 C3 - street","description":"Get rid of your old rubber bushings and insert polyurethane ones that will increase stability of the car in the corner. Polyurethane subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nThe bushings are for Audi C4 incl. S4\/S6\/UrS4\/UrS6.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pieces of polyurethane bushings with 4 sleeves - \u003cstrong\u003estreet hardens in red\u003c\/strong\u003e\u003cbr\u003e\n- it is full replacement set for the car's rear axle subframe bushings\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed\u003cbr\u003e\n- Poli Steet hardnes - 75 ShA\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n\u003cbr\u003e\nFits:\u003cbr\u003e\n- Audi C4 100 S4 \/ S6\u003cbr\u003e\n- Audi V8 D11\u003cbr\u003e\n- Audi 200 C4 3B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826683302237,"sku":"POW-016-75","price":114.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-016-75-polyurethane-subframe-bushings-rear-audi-c4-s4-s6-urs4-urs6-v8-d11-200-c3-street-3.jpg?v=1765197637"},{"product_id":"polyurethane-rear-subframe-bushings-audi-c4-s4s6urs4urs6-v8-d11-200-c3-track","title":"Polyurethane rear subframe bushings Audi C4 (S4\/S6\/UrS4\/UrS6) \/ V8 (D11) \/ 200 C3 - track","description":"Get rid of your old rubber bushings and insert polyurethane ones that will increase stability of the car in the corner. Polyurethane subframe bushings will give your suspension possibility to hold desired geometry under the forces while the car is maneuvering on the road. Now the subframe will not shift and the car will fill much more firm holding desired camber, caster and other geometry setups.\u003cbr\u003e\n\u003cbr\u003e\nThe bushings are for Audi C4 incl. S4\/S6\/UrS4\/UrS6.\u003cbr\u003e\n\u003cbr\u003e\nWhat's Included:\u003cbr\u003e\n- 8 pieces of polyurethane bushings with 4 sleeves - track hardens in BLACK\u003cbr\u003e\n- it is full replacement set for the car's rear axle subframe bushings\u003cbr\u003e\n\u003cbr\u003e\nFeatures:\u003cbr\u003e\n- CAD designed\u003cbr\u003e\n- Poli Black Track Hardnes - 85 ShA\u003cbr\u003e\n- Completely replaces OEM bushings to eliminate unwanted suspension movement\u003cbr\u003e\n- More precise feel and quicker reactions to steering input\u003cbr\u003e\n- Will not compress, crack or separate like rubber bushings\u003cbr\u003e\n- Created to reduce unwanted suspension flex\u003cbr\u003e\n\u003cbr\u003e\nFits:\u003cbr\u003e\n- Audi C4 100 S4 \/ S6\u003cbr\u003e\n- Audi V8 D11\u003cbr\u003e\n- Audi 200 C4 3B","brand":"Verkline","offers":[{"title":"Default Title","offer_id":62826683466077,"sku":"POW-016-85","price":114.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/3451\/9133\/files\/pow-016-85-polyurethane-rear-subframe-bushings-audi-c4-s4-s6-urs4-urs6-v8-d11-200-c3-track-1.jpg?v=1765197638"}],"url":"https:\/\/verkline.com\/collections\/nowosci.oembed","provider":"VERKLINE","version":"1.0","type":"link"}