Uprighs mounting kit for 15 inch wheels and carbon barkes - Audi R8/Lamborghini Huracan

Our Carbon Brake Kit complements and fits our R8/Huracan suspension kit (BKA-590) exclusively. These products are designed specifically for drag racing use only.

To ensure the best value for our customers, this kit is ready for use with Strange Engineering carbon brake discs, pads, and calipers. The biggest advantage of these parts is the ability to use 15" rims. This tire size is the most popular in drag racing. Crucially, a 15" rim allows for the use of a larger tire profile, significantly increasing traction and improving times.

Other benefits of this brake kit when combined with the Verkline full suspension kit include:
- 15" tires do not touch the chassis at high speeds due to tire deformation, which sometimes happens with 17" tires
- the possibility of significantly increasing the wheel size for better stability,
- a much larger market and availability of 15" drag tires,
- 15" rims and tires have less rotational inertia and weigh less than 17"
- carbon brake discs are 35% lighter than the original ones, which also reduces rotational inertia and unsuspended mass,
- the set includes reinforced brake hoses that improve brake feel,
- all parts were designed using FEM simulation, which proves safety, durability and lightness,
- all fasteners are made of black anodized aluminum 6082-T6, which proves good strength, corrosion and heat resistance,
- despite the huge reduction in disc size, our brake kit generates 85% of the braking power set by the OEM,
- brake balance shifted to the front axle by 15%.

What's included:

• clamp mounting


• brake caps and brake disc retainers


• ABS sensor heat shields


• Brake hoses and brake hose fittings


• screws and additional equipment necessary to install the kit in the car

Please note: Strange Engineering carbon brake discs, pads, and calipers are not included in this kit. It is the customer's responsibility to purchase the additional parts listed below directly from Strange Engineering in addition to our parts.

List of parts required to purchase additionally from Strange Engineering to make the brake kit work:

• B5042 - 2 pcs.


• B5070-150 - 2 pcs.


• C1790 - 4 pcs.


• L4050H - 8 pcs.


• P2322 - 4 pcs.

Note 2: This kit does not include the control arms shown in the attached photos. They must be purchased separately. This is part number WAS-590.

Note 3: The kit comes standard with black brake lines.